03-09-2013, 11:39 AM
Struggled a bit to locate "Smart Aluminium" no street numbers anywhere on Erskine Park Rd. I entered the complex after taking a wrong guess first time. Parked the car in a carpark near the entry & then started looking for the building. Asked a few people who hadn't heard of them. After several hundred metres of walking I found building C1 and found Capral Aluminium. The industrial estate is last on the right 100m or so short of Mamre Rd. Enter the complex & turn right at the round-about and building is a tad over 100m on left (Just in case anybody else is venturing there).
Minimum length of 10mm aluminium machine bar is 3.6m (which they kindly cut into half for transport) but was only $8.45. So the excess of approx 150mm I needed is available for our club members in need. I intend giving 1/2 to Jason for him to machine my standoffs (I will eventually need) & he can keep the rest to use as he pleases.
Minimum length of 10mm aluminium machine bar is 3.6m (which they kindly cut into half for transport) but was only $8.45. So the excess of approx 150mm I needed is available for our club members in need. I intend giving 1/2 to Jason for him to machine my standoffs (I will eventually need) & he can keep the rest to use as he pleases.