05-07-2012, 06:08 PM
your watts are low and your amps are high . indicating your not getting the power down . 15x6 way to big , 13x6 . and 4s is what your after . but try the 14x6 . still big for that size motor .
in theory yes amps drop in flight , because your model is moving forward . but i did a test in my mx2 98 amps static , and 98 amps in verticle flight . !!!!
i have since changed the motor to run less amps and bigger prop . that was a 5055 700kvwith 13x6 on 6s . i now run 5050 580kv with 15x6 on 6s and its 87 amps static , 90 amp/2000w motor . so can take it .
a big prop for yours is 14x6 max , but 13x6 on 4s will be far better , and bring the watts up to about 800 watts static , which is ok for a 10 second verticle . your not running full throttle often with 3d models , so go for it . 45 amps is ok for 10 seconds in air too , much cooler in the air thrust wash cooling everything . if i were you i'd run 13x6 4s/3s . your labouring the motor with 15x6
in theory yes amps drop in flight , because your model is moving forward . but i did a test in my mx2 98 amps static , and 98 amps in verticle flight . !!!!
i have since changed the motor to run less amps and bigger prop . that was a 5055 700kvwith 13x6 on 6s . i now run 5050 580kv with 15x6 on 6s and its 87 amps static , 90 amp/2000w motor . so can take it .
a big prop for yours is 14x6 max , but 13x6 on 4s will be far better , and bring the watts up to about 800 watts static , which is ok for a 10 second verticle . your not running full throttle often with 3d models , so go for it . 45 amps is ok for 10 seconds in air too , much cooler in the air thrust wash cooling everything . if i were you i'd run 13x6 4s/3s . your labouring the motor with 15x6
patience !! paaatience !! paaaaaatience paaaaaaatieeence dooooohhhh !!!
DANGER WIFE CAN READ FORUMS . love you darling . sig changed .