01-08-2010, 05:03 PM
i probably shouldn't Glassed mine But Mine Was already in The Making Since Xmas. Yes I have resurrected my Funjet that i Started ages ago but then Got The Stryker Up Instead so i Stored it up in the roof.
It was Glued Together and Top half Painted.
Heres Some Pictures of Its Progress Since it was pulled out of roof and Dust Taken off It.
Used 6 mm Thick balsa For Elevons and 40 mm Wide Rather than stock 30 mm Width.
Scheme For This One was easy as The only colors i had where Purple and Fluro Red, which seems to tie in with the Previously Painted Fluro Yellow.
I Have added a very thick 6 mm diameter carbon rod for Wing strength and Using The Custom RC Mount which Im Customizing To Fit as Its Designed for Stryker.
Elevons have Plastic Hinges Fitted Ready for Gluing on Finishing of Clear Coats.
Going To Put Many Coats Of The Clear Polyurethane To give It a Glossy and Firmer surface.
Steve
It was Glued Together and Top half Painted.
Heres Some Pictures of Its Progress Since it was pulled out of roof and Dust Taken off It.
Used 6 mm Thick balsa For Elevons and 40 mm Wide Rather than stock 30 mm Width.
Scheme For This One was easy as The only colors i had where Purple and Fluro Red, which seems to tie in with the Previously Painted Fluro Yellow.
I Have added a very thick 6 mm diameter carbon rod for Wing strength and Using The Custom RC Mount which Im Customizing To Fit as Its Designed for Stryker.
Elevons have Plastic Hinges Fitted Ready for Gluing on Finishing of Clear Coats.
Going To Put Many Coats Of The Clear Polyurethane To give It a Glossy and Firmer surface.
Steve
What Do You Mean Theres a Throttle Curve ?, Its Either all the way up or all the way down