[samste]

Hi Guys

I have Just Replaced my Rarebear Motor with new Stock Rarebear motor from syd rc and Replaced the Esc To http://www.hobbyking.com/hobbyking/store...duct=24247 35 amp that came in today.

Wattmeter Test comes up Interesting and puzzling but i think may have worked something out, i then temp tested the setup using a Turnigy 80 amp plush.. will publish results after further testing further but it's a bit late at night to do it now but current setup is drawing 28 -32 amps using a 6x5 prop, want to test with 5x5 prop next.

Wanted anyone with Rarebear to do a stock wattmeter test with 4s and if possible, temporary try with an alternate esc and Test,
Please Take note of amps, watts, prop, esc type, lipo type.

Steve

p.s Jason, Do Like the Idea you had of cooling the motor i got something that i will bring down Tommorow.


EDIT 03/05/2012
I believe Previous test Results are a Clear Indication of a Faulty Motor windings and a Esc issue caused by faulty motor as new Tests Reveal with new Stock Motor and New 35 amp esc testing at Full Throttle yet with old esc same results -

New Test Results
28 amps 400watts on 4s 1000ma lipo 45-90c, 6x5 apc prop--------------------------------------------------------------------------------