24-11-2011, 11:02 PM
The cut out being off centre and to the right is standard on any good quality airframe Pete.
It applies thrust down and to the right to compensate for throttle and torque. You will notice when you bolt on the motor that the centre of the prop will almost be dead centre of the cowl.
It applies thrust down and to the right to compensate for throttle and torque. You will notice when you bolt on the motor that the centre of the prop will almost be dead centre of the cowl.
Parkzone Stryker 27 Evolution
E flite Ultra Stick , T 28 Carbon Z
Skyartec Skyfun Scorpion,Skyfun 90 EDF
Hobbyking Voltigeur, Funfighter T28, Mirage 2000, Minimoa 2.4m Glider
Jet Teng L-39 HPAT Stumax 90
Pheonix Tiger 50
FliteWork Extra 300 LPX 2.6M
Spectrum DX9i , DX6
Don't ever let the fear of landing keep you from taking off!