17-05-2011, 10:52 AM
I've got the file converted to a PDF now or I can do it as a DXF too if you prefer.
I did a couple of small mods which I included in the drawings. I made the nose a little longer
so you can adjust the C of g a little further forward if you prefer. Also I added a couple of extra braces to where the motor mounts to toughen it up a bit.
It's critical with this model to balance the prop nicely
If you'd like a copy of the drawings please email me your address and I'll send over I'll also take some photo's showing the layout of servo's controll horns batery and ESC
Cheers
Jason
I did a couple of small mods which I included in the drawings. I made the nose a little longer
so you can adjust the C of g a little further forward if you prefer. Also I added a couple of extra braces to where the motor mounts to toughen it up a bit.
It's critical with this model to balance the prop nicely
If you'd like a copy of the drawings please email me your address and I'll send over I'll also take some photo's showing the layout of servo's controll horns batery and ESC
Cheers
Jason
“The knack of flying is learning how to throw your machine at the ground and miss.”
"When once you have tasted flight, you will forever walk the earth with your thoughts turned skyward, for there you have been, and there you will always long to return." ~Leonardo Da Vinci