03-12-2013, 09:11 AM
It needs some thin ply braces cut to the diheadril angle and joined on to the center spar. they need to extend out to about 3 inches towards the tip from the diheadril joint.
The other option is to use a smaller lighter motor and a lighter Lipo pack.
The trick is to not over power it so it doesn't go too fast.
Depron foam is available from srlfoamies.com
The other option is to use a smaller lighter motor and a lighter Lipo pack.
The trick is to not over power it so it doesn't go too fast.
Depron foam is available from srlfoamies.com
“The knack of flying is learning how to throw your machine at the ground and miss.”
"When once you have tasted flight, you will forever walk the earth with your thoughts turned skyward, for there you have been, and there you will always long to return." ~Leonardo Da Vinci