03-11-2010, 09:52 PM
Some More pics. This time of the fuslarge going together. First off, cut all the bits out then just glue them together. Fuse is kinda build upside down so the big open bit is at the bottom and the base is the last thing to go into place.
Once all the glue is dry, a couple of balsa blocks are sanded into shape. These go on top of the fuze to form the outline of the cockpit. Behind this a number of stringers will run down to the tailplane to give it a nice rounded look.
I'm almost up to the point where I need to start thinking about covering. Can anyone explain to me how this part works? What do I need and where is the best place to get them from. Not totally sure of the colour scheme I want yet but i'm liking the almost white and red strips of the model prototype. I like the vintage look. I've also googled up some other Luton colour schemes I like, esp the Red Baron one.
Once all the glue is dry, a couple of balsa blocks are sanded into shape. These go on top of the fuze to form the outline of the cockpit. Behind this a number of stringers will run down to the tailplane to give it a nice rounded look.
I'm almost up to the point where I need to start thinking about covering. Can anyone explain to me how this part works? What do I need and where is the best place to get them from. Not totally sure of the colour scheme I want yet but i'm liking the almost white and red strips of the model prototype. I like the vintage look. I've also googled up some other Luton colour schemes I like, esp the Red Baron one.
Spektrum DX7 Mode 2
Parkzone T28 Trojan
HK Sumo Flying Wing.... Completly Awesome!
Scratchbuilt First Step.... Slow Flyer
HK SPAD XIII....
J-Power Mini F-18 EDF
Scratchbuilt Morane Saulnier A1....Under Construction
Scratchbuilt Luton Minor.... Retired
Unbranded OV-10 Bronco.... Awaiting Build
· On the other hand, you have different fingers.