16-05-2023, 11:54 PM
Stephen, now that you have ELRS setup at the 100Hz / 8 channel / Full Rate setting, you may notice that the receiver takes longer to bind (5 seconds or so). This is because the receiver starts at 1000Hz and cycles through the available rates, eventually arriving at the 100Hz rate and binding.
The newest ELRS lua script adds a new menu item called 'Other devices' (when bound to the receiver) and in that menu you can set the intial rate for the receiver. If you set that to the same 100Hz Full rate, your receiver will bind quickly again. You'll need to do this for each receiver you have.
See this video at 6:15 for a demo:
The newest ELRS lua script adds a new menu item called 'Other devices' (when bound to the receiver) and in that menu you can set the intial rate for the receiver. If you set that to the same 100Hz Full rate, your receiver will bind quickly again. You'll need to do this for each receiver you have.
See this video at 6:15 for a demo: