Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

IMPORTANT SAFETY ISSUE
#9

Oh bugger that's my dishloksia kicking in I didn't read his post correctly Frown

I did a quick google search but I can't view a lot of the RC groups pages from this machine as they are blocked.

As Andre said the main thing is that the throttle should drop to zero on a fixed wing. I'm not sure what the FLYsky RX does when it looses signal but there's a fair chance that it just doesn't out put any PPM to the channels. If that's the case then the ESC will just shut the motor down and you'll get that by default. ?? Did you test it to see what happens??

It looks like it should according to this tutorial for using it with the APM

www.youtube.com/watch?v=HtaXna9KsS0

There seem to be a fair few posts about the failsafe with FLYsky so it would be a good idea to look into it.

http://www.google.com.au/search?q=flysky+failsafe&safe=active&surl=1&hl=en-AU&biw=&bih=&gbv=1&oq=flysky+failsafe&gs_l=heirloom-serp.3...2499673.2504168.0.2504452.15.12.0.0.0.0.0.0..0.0....0...1ac.1.34.heirloom-serp..15.0.0.10yvTmqq9Kg

“The knack of flying is learning how to throw your machine at the ground and miss.”

"When once you have tasted flight, you will forever walk the earth with your thoughts turned skyward, for there you have been, and there you will always long to return."  ~Leonardo Da Vinci
Reply


Messages In This Thread
IMPORTANT SAFETY ISSUE - by secant0give - 29-02-2016, 05:38 PM
RE: IMPORTANT SAFETY ISSUE - by disoriented - 29-02-2016, 06:48 PM
RE: IMPORTANT SAFETY ISSUE - by secant0give - 01-03-2016, 08:03 AM
RE: IMPORTANT SAFETY ISSUE - by greggold - 02-03-2016, 12:24 PM
RE: IMPORTANT SAFETY ISSUE - by eaglej - 08-03-2016, 09:18 AM
RE: IMPORTANT SAFETY ISSUE - by disoriented - 08-03-2016, 10:29 AM
RE: IMPORTANT SAFETY ISSUE - by secant0give - 08-03-2016, 11:34 AM
RE: IMPORTANT SAFETY ISSUE - by symowallo - 08-03-2016, 11:52 AM
RE: IMPORTANT SAFETY ISSUE - by secant0give - 08-03-2016, 12:01 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)