Thread Closed
Thread Rating:
  • 11 Vote(s) - 3.73 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Archive: Flying this Weekend...

(20-07-2017, 07:07 PM)dfw Wrote:  Hi Darryl,

I believe this is the council lock, there should be a number combination lock just on the outside of this pod, inside the pod connected to the bar. If you turn the bar over you should find it there.

Both combination locks have gone & the second gate is open

Strange, not sure what happened then.

If you don't live on the edge, you take up too much space.

Time to change the combination on all locks.
For the time being, possibly use the locks from the box and get some temporary locks for the box...

Gravity sucks, or should I say, is the downfall of all things flying. It's the way it's controlled that makes the end memorable or not.

Who's flying this weekend ? weather should be good (apart from 'Frosty, then Sunny" - it might take a while to warm up ;-)

I plan to be out Saturday morning.

Cheers,

Dirk.

If you don't live on the edge, you take up too much space.

(20-07-2017, 07:31 PM)Darryl Wrote:  
(20-07-2017, 07:07 PM)dfw Wrote:  Hi Darryl,

I believe this is the council lock, there should be a number combination lock just on the outside of this pod, inside the pod connected to the bar. If you turn the bar over you should find it there.

Both combination locks have gone & the second gate is open

Looks like Pete and Ron were in doing some work on the strip.

Just got back, wind was a bit srong. Will be back down tomorrow at 11am.

srl

I'm still in New Zealand, I'll be out next weekend ??

When a thumbs up turns into a question mark haha

Is anyone heading out tomorrow? And if so what time?

Cheers,
James

I will be down tomorrow Wednesday at 9am James, could be a bit of wind.
I now have the first batch of MAAA cards, I'll have them with me at the Pittown pylon race this Saturday.

srl

ahh okay cool, I might be down. Just getting over a head cold. See how I feel in the morning. I have some questions for you, bought myself an ARF Yak 54 3D off hobbyking and need to kit it out Smile Paid $62 on sale https://hobbyking.com/en_us/hobbyking-ya...m-arf.html

Looks good.

Maybe the following-

https://hobbyking.com/en_us/turnigy-nano...-pack.html
https://hobbyking.com/en_us/turnigy-ae-4...s-esc.html
https://hobbyking.com/en_us/turnigy-aero...motor.html

You could go with the longer 42 motor with a lower kv.
Anyone want to recommend a 12g servo?

srl

I put my HXT900 in the gap and they fit perfect. They are only 9g though.

I think those DMG servos would be better

https://hobbyking.com/en_us/d-mg16-digit...18-8g.html


But if you want really nice ones then Hitech make some ones

https://hobbyking.com/en_us/hitec-hs-65m...c-12g.html

Cloudio had hitech servos in the sky wing edge 540 which is similar and I had one with DMGs and I allways noticed that Claudio's one flew better everything was the same except the servos

I often wished after flying his ones. I'd gone for the better servos. I must say tho I still enjoyed the way mine flew and got lots of use from it..!!!!

“The knack of flying is learning how to throw your machine at the ground and miss.”

"When once you have tasted flight, you will forever walk the earth with your thoughts turned skyward, for there you have been, and there you will always long to return."  ~Leonardo Da Vinci

I think I'll have to give this morning a miss, still quite sick. I'll be there Sat Smile

Hi guys. Down the field this morning and found some broken glass in front of the outer gate I think I’ve cleaned most of it up but anybody going down please be careful.

Also not sure if it’s wishful thinking?, But the field looked a little bit drier than last time I seen it mind that was a while ago.

I'll be down at the field tomorrow at 8:30am. Going to Maiden the Yak Smile

good luck, if I reach on time I'll pass by to have a look !

If you don't live on the edge, you take up too much space.

Wind permitting, I plan to be there Sunday morning.

If you don't live on the edge, you take up too much space.

How did it go James?
Looks like a bit of wind tomorrow like today. I still had a fly but it was a bit of a challenge. Good thing is that the water is quickly drying up.


srl

Took off, the prop was making a really weird noise, which it didn't make on the ground. So it was one circuit and brought it in to land and on the landing ripped the landing gear out..... so yeah 30 second flight haha otherwise it was fine for CG, but when I tested the motor on the ground, it was fine. So not sure whether the slow flyer prop was making a weird noise with it cutting through the air. Will have to bring it down next weekend and see how we go. I used heaps of clue cause I smashed the balsa wood lol

(04-08-2017, 09:22 PM)Muggers1234 Wrote:  Took off, the prop was making a really weird noise, which it didn't make on the ground. So it was one circuit and brought it in to land and on the landing ripped the landing gear out..... so yeah 30 second flight haha otherwise it was fine for CG, but when I tested the motor on the ground, it was fine. So not sure whether the slow flyer prop was making a weird noise with it cutting through the air. Will have to bring it down next weekend and see how we go. I used heaps of clue cause I smashed the balsa wood lol

Check the solder on the connectors from the ESC to the motor

Maybe prop flutter. I'm about to do a order I'll get more of these - https://hobbyking.com/en_us/turnigy-ultr...6-1pc.html
Its what I use.

srl

Im off down to the field today
Batteries are charging now ??

“The knack of flying is learning how to throw your machine at the ground and miss.”

"When once you have tasted flight, you will forever walk the earth with your thoughts turned skyward, for there you have been, and there you will always long to return."  ~Leonardo Da Vinci

Sunny & low wind conditions, Saturday should be good !

If you don't live on the edge, you take up too much space.

Yep... looking forward to it.

I had some questions on Saturday about the Tempest I was flying.

I have attached a link to it AUS$209. I said it was RTF but it is actually PNP and comes with a Transmitter and receiver.
http://www.hobbyzone.com.au/dynam%20hawk...me=tempest
.jpg tempest1-228x228.jpg Size: 7.3 KB  Downloads: 111


And the Typhoon by FMS I was talking about is below.

This is $310 and 1100mm (Tempest is 1250mm)

https://www.banggood.com/FMS-Typhoon-110...s=category
   

What questions did you have Andrew?

“The knack of flying is learning how to throw your machine at the ground and miss.”

"When once you have tasted flight, you will forever walk the earth with your thoughts turned skyward, for there you have been, and there you will always long to return."  ~Leonardo Da Vinci

(28-08-2017, 11:37 AM)secant0give Wrote:  What questions did you have Andrew?

Yes, I didn't write that very well. People were asking me questions regarding where to get it how much etc.

(28-08-2017, 05:32 PM)Rossy Wrote:  
(28-08-2017, 11:37 AM)secant0give Wrote:  What questions did you have Andrew?

Yes, I didn't write that very well. People were asking me questions regarding where to get it how much etc.

Cool very nice looking machine. How did it fly ?

“The knack of flying is learning how to throw your machine at the ground and miss.”

"When once you have tasted flight, you will forever walk the earth with your thoughts turned skyward, for there you have been, and there you will always long to return."  ~Leonardo Da Vinci

Saturday is looking good ! Sunday forecast is a bit windy.
I might pass by Sat early morning for quick round, keen to try the bigger wheel set mounted on my bi-plane. I hope that will manage the grass area better.

Out for Sunday.

Cheers,

Dirk.

If you don't live on the edge, you take up too much space.

Just got back from flying, Pete has got the level areas of the strip perfect. He cut it all by himself.
Will be down by 11am. I have Barry's card.

srl
Thread Closed


Forum Jump:


Users browsing this thread: 1 Guest(s)