22-06-2016, 05:17 PM
Hi guys. I had a bit of a problem putting a new receiver in my Eachine the reason why I changed over was the receiver in it was to big I’m blind it to my Taranis with no problems than I opened libre pilot to set up the radio and refused to work at all after I called the little bit of the remaining hair that I have, I found the earth wire on the plug that plugs into the transmitter channel 1 was broken lucky had a wire set off an old CC3D that I’d bought quite a while ago mostly to muck around with, the problem is that wire is very flimsy and will be very prone to break very easily I put a little bit of tape around it very gently.