22-01-2016, 02:07 PM
Yep, I agree, give me solder any time. You can always cut the motor and ESC leads short before soldering. I usually solder the motor directly to the ESC when I can. If not, I cut the ESC wires really short and solder those to the motors.
On a quad I would never use bullet connectors. Too much vibration and another thing to fail.
On a quad I would never use bullet connectors. Too much vibration and another thing to fail.
FrSky Q X7 Mode 2, Turnigy 9XR Pro and Evolution. Multirotors, planes plus a couple of heli's. Too many to list.
Aaaaand if the wife is reading this: "The club made me buy these planes, I had no part in it, honestly!"