[secant0give]

Here's the parts list again

I put one together using this frame $21 from ebay

http://www.ebay.com.au/itm/H250-ZMR250-Q...2c93cf47dd

and this controller
http://www.hobbyking.com/hobbyking/store...5Mhz_.html

using the afro 12A ESCs from HK and
http://www.hobbyking.com/hobbyking/store...3_RU_.html

these motors, T-Motor MN2204
http://www.multirotorgear.com/t-motor-mn...0kv-motor/
or here
http://www.ebay.com.au/itm/T-Motor-MN220...4191610ac4

They are bit a dear for a small motor at around $32 each but they are so nicely made and super tough.

Here's the FPV gear I've used on the bigger quads and it works great.
http://www.hobbyking.com/hobbyking/store...ennas.html

Here's another good option if you use the 86deg lens option it's going to have a wider field of view which I quite like.

http://www.hobbyking.com/hobbyking/store...RC832.html

With this camera it costs about $10 more than most other cheapies but it worth it for the quality and the ease of mounting as well as it's small size. It has much better dynamic range than the camera that comes with the Hobby king combo. It's the one I use on my micro quad.
http://shop.runcam.com/runcam-sky/


I like the look of this camera for on-board HD recording.
http://shop.runcam.com/runcam-hd/

These antennas are pretty good too, you don't want to use whip antennas
http://www.hobbyking.com/hobbyking/store...A_RP_.html