06-05-2015, 05:13 PM
Hi Bob
The solder I'm using is .9 mm but it should'nt matter if it's a bit thicker or a bit thinner.
Just tinm the wires first and it should go nicely
The solder I'm using is .9 mm but it should'nt matter if it's a bit thicker or a bit thinner.
Just tinm the wires first and it should go nicely
“The knack of flying is learning how to throw your machine at the ground and miss.”
"When once you have tasted flight, you will forever walk the earth with your thoughts turned skyward, for there you have been, and there you will always long to return." ~Leonardo Da Vinci