18-05-2014, 12:26 PM
Here's a bargain for the right buyer...
Purchased this half-finished project on RCTrader a couple years ago, intending to complete it as a larger scale UAV. Besides unboxing it and checking out how it faired in transport (some very minor crush damage to a rib, and some misc small cuts in covering) I've not touched it since.
Reluctant sale, as I'd like to get to it one day... but that day is likely a few years out still. Condition of sale is I get to see it fly sometime
Airframe is a Hugin (or Mugin?) platform, v-tail with 6ft wingspan.
Airframe comes with:
Finally, we have:
I'd also recommend that the future owner undertake a "TLC + lightening" project, as some of the gear is just overkill (strobe lights, really?) and installed in the heaviest way possible.
Easily over $1000 worth of gear. Looking for $350 ono.
Will consider parting out some gear (e.g. eagletree system, servostation) for reasonable offers.
Interested? Leave me a message here, or contact me via the details listed in http://forum.rcflyingclub.com/showthread.php?tid=410
Purchased this half-finished project on RCTrader a couple years ago, intending to complete it as a larger scale UAV. Besides unboxing it and checking out how it faired in transport (some very minor crush damage to a rib, and some misc small cuts in covering) I've not touched it since.
Reluctant sale, as I'd like to get to it one day... but that day is likely a few years out still. Condition of sale is I get to see it fly sometime
Airframe is a Hugin (or Mugin?) platform, v-tail with 6ft wingspan.
Airframe comes with:
- 5x Bluebird 620HSDMG servos installed for tail surfaces, wings and nose steering (http://www.hobbyking.com/hobbyking/store...c_52g.html)
- Turnigy ESC (as pictured; believe it is this one: http://www.hobbyking.com/hobbyking/store...oller.html)
- Turnigy Aerodrive C4260-500 motor
- Millswood Engineering Servo-station - like a Super BEC (http://www.millswoodeng.com.au/servostation.html)
- Kemo DC/DC converter (http://www.jaycar.com.au/productView.asp?ID=AA0218&form=CAT2&SUBCATID=1002#1)
- Nav lights installed in tail and wing-tips (from memory, I believe at least one tail light is non-functional)
- MPi ACC 248 Strobe light system (installed in wing-tips if I recall; http://www.rcdude.com/servlet/the-592/MP...hts/Detail)
- Nose Light driver (https://www.sparkfun.com/products/9748) with lens and 3 high-power LEDs installed
- A couple of complete overkill heavy duty switches (ditch em - too heavy!)
- Eagle Eyes FPV station (without case; https://www.hobbyking.com/hobbyking/stor...ation.html)
- OSD Pro (http://www.hobbyking.com/hobbyking/store...nder_.html)
- elogger v3
- GPS Expander
- Altitude Microsensor V3
- Airspeed sensor
- RPM Sensor
Finally, we have:
- FPV transmitter (details unknown, but functional)
- 21HQX Sony Super EXVIEW CCD bullet camera
I'd also recommend that the future owner undertake a "TLC + lightening" project, as some of the gear is just overkill (strobe lights, really?) and installed in the heaviest way possible.
Easily over $1000 worth of gear. Looking for $350 ono.
Will consider parting out some gear (e.g. eagletree system, servostation) for reasonable offers.
Interested? Leave me a message here, or contact me via the details listed in http://forum.rcflyingclub.com/showthread.php?tid=410
<table width="100%" border="0"><tr>
<td>
<span title="No longer arboreally challenged!">Parkzone Stinson SR-10 </span>
Extra-300S EPP
<del>F-18 Blue Angels 64mm EDF</del>
<span title="Why won't it die?!">HK Mini Cessna EPO</span>
Spektrum DX6i - Mode 1</td>
<td valign=top>
Parkzone T-28 Ultra Micro
E-Flite UMX BEAST
SRL Index
CloudsFly / AXN Floater
"2x6" basla/ply kit built glider
SBach 1000mm</td>
<td valign=top>
Skyartec Cessna 182 (small UAV)
UAV-168 (bigger UAV)
<span title="2nd-hand; rebuild on-hold">"BigBoy" Hugin (biggest UAV)</span>
<span title="For invading small countries">X-8 flying wing</span></td>
</tr></table>