16-07-2013, 07:10 AM
You could allways try a 16X8 2 blade prop. Have you got an Amp meter ?
Just check to see that it's not pulling too much current. If it is go for a 16X6 but I think the 16X8 would fly it probably better and certainly spool up faster than the original 4 blader and it will likely be cheaper too.
http://hobbyking.com/hobbyking/store/__9..._16x8.html
Here's the 16X6 as well
http://hobbyking.com/hobbyking/store/__9..._16x6.html
I'd order a couple of each as wooden props are a little easier to break than plastic ones.
Amp meter/Wat meter can be found here
http://hobbyking.com/hobbyking/store/__1...lyzer.html
Just check to see that it's not pulling too much current. If it is go for a 16X6 but I think the 16X8 would fly it probably better and certainly spool up faster than the original 4 blader and it will likely be cheaper too.
http://hobbyking.com/hobbyking/store/__9..._16x8.html
Here's the 16X6 as well
http://hobbyking.com/hobbyking/store/__9..._16x6.html
I'd order a couple of each as wooden props are a little easier to break than plastic ones.
Amp meter/Wat meter can be found here
http://hobbyking.com/hobbyking/store/__1...lyzer.html
“The knack of flying is learning how to throw your machine at the ground and miss.”
"When once you have tasted flight, you will forever walk the earth with your thoughts turned skyward, for there you have been, and there you will always long to return." ~Leonardo Da Vinci