05-02-2013, 03:05 PM
Hi Wayne
If you can put the ESC in the cowl now while you still building it, you can just place it behind the motor in the mount and Zip tie it.
It is the best place to keep it cool, it will always be in the air flow, and you can shorten the leads between the ESC and motor for best performance. No modification or trays required.
You chose a very nice scheme on this MX2.
If you can put the ESC in the cowl now while you still building it, you can just place it behind the motor in the mount and Zip tie it.
It is the best place to keep it cool, it will always be in the air flow, and you can shorten the leads between the ESC and motor for best performance. No modification or trays required.
You chose a very nice scheme on this MX2.
George
"Crash and Cry! Don't fly"
Radio
X9 & DX8HK Cri Cri ugly,Super Cub 1870mm balsa, Sbach 1000mm balsa, Vampire, Katana E50 balsa, BA Hawke 90mm (on hold for large runway), Durafly BF110, Corsair,
EScale Zero
Freewing Eurofighter Typhoon & SU-34
Starmax F5e Tiger & 70mm F-18
FMS T-28 Trojan, P-38 Silver, 50mm F-86, C-17 Globmaster
Fly fly F-100
B-25 2.0m LX and A10 1.5m Langxiang (being glassed and re-built)
Seagull Super Tucano