24-01-2013, 12:47 PM
I would use west epoxy and filler, mix it thick so it doesn't drool out of the joint while it's curing.
Five min or 30 min epoxy probably will drool on you.
You can use the same filler with 30min epoxy just let me know if you want some and I'll bring it to the field on Satterday.
make sure you pack it with thin balsa wedges to it sets straight, eyeball it against the the wing spar tube from behind
Five min or 30 min epoxy probably will drool on you.
You can use the same filler with 30min epoxy just let me know if you want some and I'll bring it to the field on Satterday.
make sure you pack it with thin balsa wedges to it sets straight, eyeball it against the the wing spar tube from behind
“The knack of flying is learning how to throw your machine at the ground and miss.”
"When once you have tasted flight, you will forever walk the earth with your thoughts turned skyward, for there you have been, and there you will always long to return." ~Leonardo Da Vinci