[Kedumba]

Hi All,
Having a small problem with a HobbyKing Red Brick 60A ESC that I'm useing in my EPP FPV.

First, I'm using an AR7000 Rx, the one that came with my DX7 in this plane. I have a separate UBEC hooked up to a battery to power the RX and servos and a separate battery hooked up to the ESC.

I have bound the RX to the DX7 and the Servo's move in response to stick commands - all good, however the ESC won't initialise.

Here is the process I'm using:
1: Turn On Tx
2: Hook up Rx battery.
- Rx light lights up, servo's jump.
- If I move sticks, Servo's move in responce
3: plug in ESC battery
- ESC goes boop-bar-beep and then pauses for approx 5 or 6 seconds
- it then starts going boop-bar-beep pause boop-bar-beep over and over again. No other response from ESC or motor regardless of what I do.

Does anyone have any idea what could be causeinbg this problem or what I should be checking.
Thanks
Mick