[~KevJ~]

hey considering the fact that alot of skyfun's were bought i thought perhaps a thread could be useful for building and modifying techniques..

i started mine tonight and took some pics, ( warning.. hk 5 min expoxy is fast! 4-6 is all you get to have it set)

i decided after reading some bad reviews that id remove motor mount and reglue, you can see in third photo that glue is not consistent across the entire underside of mount plate


It really didnt take much to take the plate off, as i applied pressure it sort of flexed and then "pop" , i reckon in a high G outside loop or something she could come right off in flight!



glued first side by wing first then added vert fin.. not sure this is best method had some trouble with vert fin after first joint overglue had dried, 30 min epoxy prolly would have eliminated this problem..





I did the secon side all in one go cause i was worried about not having enough epoxy left, this would have been easier if i had 3 hands, nevertheless it got done.




adding some fibreglass spars 2morrow.. getting late.

guys feel free to add pics of things done differently and what not cause im just going for it and will like the info..