08-02-2010, 09:12 PM
Fibreglassing almost finished.
It certainly seems to have added a bit of strength to the airframe
and weight is ok.
I reckon it would be much easier to F/G the individual parts rather than
attempting to do it after assembly.
Just have to put finishing coat of WBPU and talcum powder on then she should be ready for painting.
Bit hard to see any difference by photograph at the moment but will post
one when finishing coat is on.
Paul
It certainly seems to have added a bit of strength to the airframe
and weight is ok.
I reckon it would be much easier to F/G the individual parts rather than
attempting to do it after assembly.
Just have to put finishing coat of WBPU and talcum powder on then she should be ready for painting.
Bit hard to see any difference by photograph at the moment but will post
one when finishing coat is on.
Paul
Jet Teng L39(Breitling)
Scratchbuilt F14 Tomcat(Pukin Dogs)
Vector X
Eflite F86 Sabre(Taz Tiger)
Qantas Airbus A380(Nancy-Bird Walton)
Boeing 737-800
ProEDF F16
Falcon 120(Gas Turbine)
Fly Fly F100 Super Sabre
Pheonix Tiger 6
VQ Models P61 Night Fighter
CY Models FW190