18-06-2023, 10:32 AM
I have 2 plots that are similar to your plot, on the Slick with a matek T24P6.
In Slick #201, RSNR dropped to 3 at 86 sec and at the same time TPWR increased to 25 where it remained for 1 second (2 green dots); at 242 sec RSNR dropped to 1, with no effect on TPWR and no problem with RSSI or RQly.
In Slick #113, RSNR dropped to 2 at 122 sec; there are a few other low values of 3 and 4. But no TPWR increase was triggered, and again there is no problem with RSSI or RQly.
I had a theory that blenders were affecting TSNR, but that is not really supported in these plots. Throttle cut is -20 on the plots and always indicates the top of the climb, followed by the plunge and spin.
In Slick #201, RSNR dropped to 3 at 86 sec and at the same time TPWR increased to 25 where it remained for 1 second (2 green dots); at 242 sec RSNR dropped to 1, with no effect on TPWR and no problem with RSSI or RQly.
In Slick #113, RSNR dropped to 2 at 122 sec; there are a few other low values of 3 and 4. But no TPWR increase was triggered, and again there is no problem with RSSI or RQly.
I had a theory that blenders were affecting TSNR, but that is not really supported in these plots. Throttle cut is -20 on the plots and always indicates the top of the climb, followed by the plunge and spin.