30-03-2020, 11:21 AM
HI Jason and members.
Day one of no Mccoy I replaced the battery in my drill.
Sadly I have lots of basic landscaping to do around the house.
One thing I'm looking foward to is getting the CNC setup again but first the garage floor needs to be painted. i'm hoping to get this done when we next get a few fine days.
I mainly use the CNC to cut out indoor depron aircraft but it also cuts plywood. This is a motor test stand I made a couple of years ago using FRsky telemetry.
If you have any Ideas then start with a CAD program. I use Qcad (2.5D) for the CNC and Fusion360 for the 3D printer.
Day one of no Mccoy I replaced the battery in my drill.
Sadly I have lots of basic landscaping to do around the house.
One thing I'm looking foward to is getting the CNC setup again but first the garage floor needs to be painted. i'm hoping to get this done when we next get a few fine days.
I mainly use the CNC to cut out indoor depron aircraft but it also cuts plywood. This is a motor test stand I made a couple of years ago using FRsky telemetry.
If you have any Ideas then start with a CAD program. I use Qcad (2.5D) for the CNC and Fusion360 for the 3D printer.