Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Eachine Racer 250 and 250 Pro
#1

Selling my eachine racer and racer 250. Though both used and seen some damage, both still fly fine.

The Eachine Racer is a beginner racing quad 250 size. It was my first and is 2-3S, you can even put a 2200 3s on it. Has cc3d board using Libre pilot. Has spares including a used frame which incorporates the PDB (Power distribution), though missing some caps, no biggie. I have refitted caps on the main and a torrid to get clean video.
Spares: frame, arms, CC3D FC (not sure it works), box of props, bits and pieces

The Eachine racer 250 pro is a different frame and takes 3s-4s... much more zippy, has an F3 board with cleanflight, uses the same arms and vtx as the normal 250. Needs aerial to be resoldered onto vtx, I can do it if you need, but recommend a pigtail be fitted
Spares: Includes two spare ESC's, same arms VTX and camera as above

Both quads are fitted with frsky receivers, XM I think? (no telemetry)

I have had a lot of fun with these and taught me about quads, these will suit a beginner wanting to ease into quad flying. Biggest issue I have had with these is the aerial breaking off the vtx, I just started soldering the aerial straight to the board... i would recommend the new owner to get a pigtail and connect aerial to the frame to stop this happening. Also the vtx on the std racer has lost its very simple OSD, not a big issue still works for FPV.

I am selling as I have moved onto self-built higher performance 210s, and these wont get flown much more now.

$100

These are no longer sold by bangood, but they still sell all the spare parts, here are some listings.

https://www.banggood.com/Eachine-Racer-2...42643.html

Standard 250 No longer listed on BG but lots of info on the net.
https://www.rcgroups.com/forums/showthre...-HD-Camera

Photos here - https://photos.app.goo.gl/BS9NSTi2zSlD9LVX2

Club President
------------------------------------------
Reply


Messages In This Thread
Eachine Racer 250 and 250 Pro - by robbo - 24-03-2018, 12:52 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)