29-03-2014, 06:46 PM
Do you have a spare slot in your receiver?
If so, I'd be plugging one in there and doing a mix back to your gear channel with reverse on the incorrect side.
If you are strapped for channels you can get inline servo reversers. I use one in the red Funcub in my avatar because it's bound to a DX6i and is easier. I have the flaps on the white and blue one set like my example above (DX8). Silly peoples molded the flap servo recesses with the same orientation as the ailerons so ... one is up while the other is down.
If so, I'd be plugging one in there and doing a mix back to your gear channel with reverse on the incorrect side.
If you are strapped for channels you can get inline servo reversers. I use one in the red Funcub in my avatar because it's bound to a DX6i and is easier. I have the flaps on the white and blue one set like my example above (DX8). Silly peoples molded the flap servo recesses with the same orientation as the ailerons so ... one is up while the other is down.
Signature overload. That list just got ridiculous. However, Funcubs are .... fun.