17-11-2011, 12:46 PM
Sounds great Rob, I like the idea of keeping it light as possable !!
I'm very keen to see what you create from these cores !!
I put up a build thread a while back on the smaller (1.4m) set of cores I used for the FPV wing
here
http://forum.rcflyingclub.com/showthread.php?tid=305&pid=9237#pid9237
It shows how I cut away the Trailing edge at the center section to clear the prop it seems to fly quite well like that.
You can see from the pics that thee's no dihedral but I can't see any reason not to put any in if you want it to be even more stable
I'm very keen to see what you create from these cores !!
I put up a build thread a while back on the smaller (1.4m) set of cores I used for the FPV wing
here
http://forum.rcflyingclub.com/showthread.php?tid=305&pid=9237#pid9237
It shows how I cut away the Trailing edge at the center section to clear the prop it seems to fly quite well like that.
You can see from the pics that thee's no dihedral but I can't see any reason not to put any in if you want it to be even more stable
“The knack of flying is learning how to throw your machine at the ground and miss.”
"When once you have tasted flight, you will forever walk the earth with your thoughts turned skyward, for there you have been, and there you will always long to return." ~Leonardo Da Vinci