13-11-2011, 10:12 PM
HK Stinger 64
http://www.hobbyking.com/hobbyking/store...duct=17942
Maiden flight was hairy, even with 80% expo it was all over the place. Also found even with the 2200 3S nanotech as far forward as possible still tail heavy.
2nd flight - dialled in 50% dual rate, sinker in the nose and much much better. Although the esc carked it as i found out once i was home, this made me crash apon landing and snapped the tip off the wing.(Easy fix luckily)
Read up in the forums that the esc is dodgy, so that will be replaced with a 40a.
Did try it with a thrust tube, but it blew a corner up and foulded the tube. Need to find a better way to keep its shape better.
Overall pretty happy with the jet.
http://www.hobbyking.com/hobbyking/store...duct=17942
Maiden flight was hairy, even with 80% expo it was all over the place. Also found even with the 2200 3S nanotech as far forward as possible still tail heavy.
2nd flight - dialled in 50% dual rate, sinker in the nose and much much better. Although the esc carked it as i found out once i was home, this made me crash apon landing and snapped the tip off the wing.(Easy fix luckily)
Read up in the forums that the esc is dodgy, so that will be replaced with a 40a.
Did try it with a thrust tube, but it blew a corner up and foulded the tube. Need to find a better way to keep its shape better.
Overall pretty happy with the jet.
Dynam Pitts 12 EPO
Eflite Advance 25e
HK P-51D Mustang
3D Reaktor
Pitts Python S12 EP 54inch EPO
Kinetic 800
Decathlon EP 62.6inch
Stinger 64 EDF
Spektrum DX6i (mode 1)