21-08-2011, 10:41 AM
We can get some cores cut for about $20 each plus the price of the foam and the postage will be zero dollers. They will be a better model, only thing is there will be no instructions but you don't get much from HK in that department.
If you post up if your interested in a set I'll organize a price for the foam and cutting it as I'm going to get some cut for my self shortly.
These would be the same dimensions as my FPV wing which flies well enough as a pusher.
I'm also going to get a larger size (straight scale up) set of cores cut as well
here's a link to the fpv wing build thread.
http://forum.rcflyingclub.com/showthread.php?tid=305
span is 1.4m
tip section is SD8000 cord is 200mm
Root section is RG15 cord is 350mm
Sweep = leading edge of the tip section is 320mm back from the LE of the root section
“The knack of flying is learning how to throw your machine at the ground and miss.”
"When once you have tasted flight, you will forever walk the earth with your thoughts turned skyward, for there you have been, and there you will always long to return." ~Leonardo Da Vinci