21-12-2015, 01:55 PM
Hi Bob as Symo has suggested you wont need to gule your Quanum V2 together. Mine is just held together with the sock that it comes with.
On modification I've done is to remove the original screen and fix a 5" Lumenier on the end of the visor using hot melt glue. It works much better than the original monitor and is easier to focus on because it's a little further away.
Here is a link to monitor I used
http://www.lumenier.com/products/fpv-monitors
Can I also recommend you consider these guys they have lots of FPV bits and pieces in stock as well as complete packages. And they offer free shipping.
http://mongrelgear.com.au/
On modification I've done is to remove the original screen and fix a 5" Lumenier on the end of the visor using hot melt glue. It works much better than the original monitor and is easier to focus on because it's a little further away.
Here is a link to monitor I used
http://www.lumenier.com/products/fpv-monitors
Can I also recommend you consider these guys they have lots of FPV bits and pieces in stock as well as complete packages. And they offer free shipping.
http://mongrelgear.com.au/
“The knack of flying is learning how to throw your machine at the ground and miss.”
"When once you have tasted flight, you will forever walk the earth with your thoughts turned skyward, for there you have been, and there you will always long to return." ~Leonardo Da Vinci