18-02-2014, 08:38 AM
Actually, having a closer look, it appears that that motor (from the picture and user reviews/comments) can't be mounted as a pusher, so I had another look. How about the D2826-6 2200kv Outrunner Motor from Hobbyking? Would this also be ok? I'm not real sure about the 40amp ESC requirement. Seems a bit big for this model?
The magazine reckons it should be around 600 grams weight all up when ready to fly. The setup in the magazine used the above mentioned PPB-2824-1300 motor spinning a 7x5 prop and a 25amp ESC.
I'd really appreciate any suggestions.
Thanks
Mick
The magazine reckons it should be around 600 grams weight all up when ready to fly. The setup in the magazine used the above mentioned PPB-2824-1300 motor spinning a 7x5 prop and a 25amp ESC.
I'd really appreciate any suggestions.
Thanks
Mick
Spektrum DX7 Mode 2
Parkzone T28 Trojan
HK Sumo Flying Wing.... Completly Awesome!
Scratchbuilt First Step.... Slow Flyer
HK SPAD XIII....
J-Power Mini F-18 EDF
Scratchbuilt Morane Saulnier A1....Under Construction
Scratchbuilt Luton Minor.... Retired
Unbranded OV-10 Bronco.... Awaiting Build
· On the other hand, you have different fingers.