14-11-2013, 05:20 AM
The Super and cheaper MX2 comes as an ARF airframe doesn't it? with out any servos in it as all?
the best servos to put in that airframe would be hitec 5085s or the new High voltage version of the 5085. the you won't need a BEC, as long as you have a High voltage receiver. Most 6S ESCs have a built in BEC so you don't need the HV servos and receiver for this one.
Back to the 5085s, they have it all ! they are light only 22g they are powerfull with 4Kg/cm torque and they are fast and they are precise in there positioning as well. They are a little pricey tho so it pays to shop around for them. HK unfortunately doesn't stock them
I think electric wing man does. you might have to make some plates out of 1.5 mm ply to fit them in as they are probably smaller than the servo holes in the model. It will be worth it tho' !! “The knack of flying is learning how to throw your machine at the ground and miss.”
"When once you have tasted flight, you will forever walk the earth with your thoughts turned skyward, for there you have been, and there you will always long to return." ~Leonardo Da Vinci