[wingtipper]

WELL HERE IT IS . IT WILL BE MAIDENED TOMORROW .
purchased online on thursdat at 10 am in HONG KONG , and delivered to my door at 9am on monday .
ITS PNP , but takes around 4 hours to setup . very nice plane , great instructions , well put together at factory . very improved . i'm pleased with FMS progress , they seem to be getting there with quality and continual improvement .
weighs in at exact;y 2.5kg flying weight with 5s 3000mah battery . its only just right with C of G . So the recommended 4s 2600mah battery is a no go .
besides it can run on 5S . TESTS ON 5S ARE 43 AMPS MAX @ 19V 817 WATTS . WHICH COMES IN AT 140 WATTS PER POUND . THIS MOTORS MAX VOLTAGE IS 18V . BUT IF YOU LOOK AT OTHER BRANDS WITH 42X50 540 KV MOTORS they are good for 5s 19v 900w and good for 60 amps on 4s so i see no problem and the supplied 65 amp 6s ESC is more than enough .
alloy shock retracts and redesigned blades make the 4 blader now very quiet , the sequencer and 17g servos seem up to the job . the plane and stickers supplied are extreme scale as they tell you where to mount over 100 stickers .
i just have to fly it and see how it goes .