12-08-2013, 12:41 PM
Here's the Fuse plug with Plasticine to mask a couple of places where I don’t want to get any Gel-coat or resin running into.
I’ve also use plasticine to form an edge along the wing saddle which may make it a little easier to do. I just formed it up with bog on side one and it took a bit of doing.
Now all it needs is 3 coats of PVA and it’ll be ready to lay up side 2
Here’s some parts from the fairing and Hatch moulds I sprayed them with PVA at the same time as I sprayed side one of the fuse plug, no point in cleaning the gun twice.
I’ve also use plasticine to form an edge along the wing saddle which may make it a little easier to do. I just formed it up with bog on side one and it took a bit of doing.
Now all it needs is 3 coats of PVA and it’ll be ready to lay up side 2
Here’s some parts from the fairing and Hatch moulds I sprayed them with PVA at the same time as I sprayed side one of the fuse plug, no point in cleaning the gun twice.
“The knack of flying is learning how to throw your machine at the ground and miss.”
"When once you have tasted flight, you will forever walk the earth with your thoughts turned skyward, for there you have been, and there you will always long to return." ~Leonardo Da Vinci