[samste]

Thanks Today To Gazz, i manage to get a warhead 1850kv motor to fit in.

Well This is Confusing max Amps now is 118 amps.

Using same esc and settings and 6s full charge lipo this is what i get -

Current Stryker Edf Setup 138 amps max

viper original motor 104 amps max.

Swapped out with my spare war head, 104 amps max.

Gazz's Warhead 118 AMPS Max

So all i can fiqure out is that i actually have a 1850kv in Stryker.
My spare Edf Motor and original motor in Viper is 1350kv
Gazz's Edf Motor is 1500kv or there abouts.

????????????????????????????????????????????????????
http://www.hobbyking.com/hobbyking/store..._90mm.html

http://www.hobbyking.com/hobbyking/store..._90mm.html


Is there any web Forums regarding these Warheads as i know Ian Talked about an issue with them from Pemac that they were picking diffent kvs as there not labelled and batches were different.

Steve

P.s With Gazz's Motor in the viper holds it own weight and goes up on full throttle with max charge. But Definately not 1850kv like my stryker edf.

Also Gazz your motor box was labelled 1350kv though it had textered 1850 kv ?