Hi Guys After burning out my scorpion 2221-10 3000kv on 4s with 6.5 prop When i Got home and started to look at all the motors i had in my box of goodies and was thinking rather than high kv bu...

Drew Wrote: (06-07-2011, 09:38 AM) -- Back on a much older topic, have you seen this (http://www.rcsuperhero.com/index.html) site? maybe you could copy the skeleton and skin it? -- I was hoping fo...

Dolly Setup looks Good, It Does seem to look a little low to the ground, my concern would be of prop hitting ground, maybe larger wheels for some more height ? and yes that is similar to what i was t...

Tsurwolf Wrote: (01-07-2011, 10:51 AM) -- Hi guy's Just completed a Hobby King Skyfun, ready for test flight, but i am concerned about the prop hitting a hand. I have been working on a dolly fo...

robair Wrote: (13-06-2011, 08:53 AM) -- G'day Stephen Nice Stryker mods, 10*10 prop must be a tight fit. Seeing as the weather is so crap I was considering ruddering up my Stryker as today's proje...

Hobbyking Pylon Racer has been Resurrected Today with new Alloy Motor Mount Front end Chopped In, Some Custom Reinforcing and Paint Job To Cover up all the Repairs. (Hammer metal Grey Paint looks Dif...

You could also just use the power Supply from main battery rather than separate battery for bec. Just Solder pos/neg to Main Esc Pos/Neg. Thats It. Keeping in Mind what does your Bec Voltage Work ...

Mini Swift With Night Lights

Resurrected my old Mini Swift with Some Alterations for Better Gliding and Control, I Hope. Just Need To add Some Night Lights For Flying Now. Steve

After Today Flying with New 4s Lipos i found that i burnt out my 80 amp speedy. I Replaced my Speedy to a 100 amp speedy with 150 amp burst. Well I think My old speedy was limiting the amps that...

Some Toys were Waiting at Post office for me :) http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=15534 http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=1623...

Deciding to go motor and prop on each shoulder for Flying man, as take off and hover may be better control this way rather than edf s on back Just trying to workout what size to go for. Will be Ru...

Yes i Think its a Tricky one to get right as well as its a inflatable flexible frame where dealing with. Kieran Did have a idea a while ago when i first started to tackle the job EDF, I'm For EDF b...

Paul it uses a thumd stick lever on handle bars that inputs to 24v 500 watt speedy but you could also use a motor bike style throttle as well. There are many types of parts and kits out there to cust...

Just Did A Bike Ride Test on The Electric Bike and was Quite Surprised How Far It Goes. Pedaling was a no no on this test. Stats - Battery - 6 Cells 10000ma lipo (2x 6s 5000ma in Parallel) Di...

Lipo Power In Action Ended up using XT60 Connectors for lipos that i got. Turnigy 6s 5000ma in Parallel running electric bike Max amps draw 28 amps, Running current approx 10 amps with normal ...

Several hours in the workshop and Glider Revamped and ready to Go again. Before Now Steve :)

Hd Key Camera With My Custom Mount Using Lipo Connectors lol in the upright Position Now. Works Well Though Will Give It a Run On Saturday.

A Bit Windy but a Maiden was Necessary. Note the Stock Wheels on Yak Does Not like Landing on Grass but it's good for Take off on the Concrete. Very Pleased with The Outcome, a 100% improvement. h...

Hi All Here is my HOBBY KING YAK MODIFICATION After some discussion down field this is the way i gone,will be interesting how it goes now. If It Flies Well then a nice new repaint will be in or...

Stryker Finished Serviced My Scorpion Motor Too With Bearing and Shaft Change ;) But Dilemma Cannot Fly Both At Same Time :confused: Steve :)

Stryker Build Continues Balsa Ailerons, Custom Rc alloy Motor mount, Metal Gear Servos with Carbon Rod Sleeves on Rods.

Stryker F27c Painted I was going top go the whole Hog and Fully Glass with many layers and smooth to fine Finish but decided to fully glass back and front and back edges on top once. and giving extra...

Thanks Paul, I'm Hoping for a Nice Strong Frame. Steve M I'm Using the Water Based Polyurethane Bought From Bunnings. Here is Link of Can Picture. http://www.parramatta.rcflyingclub.com/mybb/show...

I Have Finally decided To Do It, Since i have had the Fiberglass Cloth for several months Now, Inspired by pauls Glassing Job on His Plane. Was going to use the existing Stryker Frame, But Decided to...

Funjet In Hanger waiting for 200 Amp Esc to Arrive has had a Mini Make Over. Funjet Retractable Landing Gear, For Ground Take Off's, Still a Work In Progress as need to Replace Nose Retract so i ca...

Thanks Guys for the Advice i ended up cutting the film to epoxy the balsa with in as it had a fracture/Break, from hard forced landing that was caused from pushing the limits to Standard Frame without...

Hi Guys Do You Think Using a Iron will shrink the bubble i have on a Main Wing Film ? Steve :)

~KevJ~ Wrote: (16-09-2010, 06:19 PM) -- good job mate , that may come in handy for the new guys, also if your selling a plane or something and somebody want to test her or something :) -- Yeah i th...

RE : Buddy System I have Modified a ZX10 TX to work with any Spectrum Transmitter (Since now i using a Spectrum DX7). I will be Bringing Down the ZX10 Buddy Transmitter to The Field Every Time as it ...

Hi Guys . A Little Disappointed Today with The New 150 amp ESC as the Timing was way off and as soon as i got close to or under 3/4 throttle the motor would Stop. and whine. I Was Running The 7x...

I Really need to get out and Fly, Espeacially when i'm giving My Panther Mini Makeover, To Liven It Up A bit. Steve :)

gbanger Wrote: (31-08-2010, 05:29 PM) -- Looks like a sweet ride Steve You never stop surprising us....... does your wife still talk to you? Will be watching the sky for that smart looking piece of...

~KevJ~ Wrote: (30-08-2010, 08:34 PM) -- the rifle is all yours mate :) your evader might have a bother tho .. -- :leet: We Could be Wing Buddies LOL SUPER CHIPMUNK 10E BUILD Picked up From ...

Yeah Evader is quick, Plus i like the Idea of them being Fiberglass, But man That is one big evader in The picture, Thats probably the Size and what Darren's in Secretly Building :twisted: or similar....

kizza42 Wrote: (30-08-2010, 05:30 PM) -- Sweet, thanks very much mate -- Not a problem It looks Pretty good Unit very similar to the 100amp i have already, Hopefully do the job. P.s just got in ...

Kieran My Speedy has come in for Funjet so 7x9 prop can be attached :twisted::twisted: My Existing 100amp was being pushed to limits with 7x6 prop Pdf Manual attacherd for KFORCE 100amp to 150amp ...

A-10 Resurrection Steve :)

kizza42 Wrote: (25-08-2010, 10:47 PM) -- Turnigy 35-48A is > than all! -- Yes and i have one already from my pogo trialing of motors :cool: For those who don't know this is the motor Kieran me...

Hi guys Here is my new addition To my aircraft Which i have ordered and waiting for its arrival. You Guessed it Balsa :D Was hoping for some feedback on what motor you guys should think i shoul...

paulj Wrote: (30-07-2010, 12:17 AM) -- Looks cool mate. Any noticable difference in weight? Running off flight battery or seperate? -- Thanks Paul, No Difference in weight as they weigh next to n...

Been busy This afternoon as i bought some LED's many months ago and they been sitting on the shelf for ages. I have been keen to do a bit of Park flying at night as its quite lit up where i am so you...

kizza42 Wrote: (26-07-2010, 08:14 PM) -- I'm afraid the answer for your need for speed is here: http://www.kingtech-jet.com/ -- Wow Thats Nice, Thinking out Loud Here, One of those on the bac...

I had a Chance this afternoon for a speed test on The Pogo I did a speed Test with Pivot Tube setup above Running 80 ESC, Eflite 1250kv, 8x8 APC prop, 2250 4s lipo 40c Horizontal speed 162 kph ...

Pogo's New Modification For Testing. Pivot Tube Speed Tester Temporarally Installed while checking Props Etc Steve :)

As Kieran said To me earlier Im an Eflite Junkie :D Have swapped out Tonight the Turnigy 1100kv for the Eflite Power 25 1250kv that came from the US Today. Motor Test with - APC 8x8 Prop Efli...

robair Wrote: (17-07-2010, 07:48 PM) -- Gday Steve That pogo will absolutely hammer, why am I not surprised you have the poor thing now sucking 82 amps after only one flight. :thumbup: Quick q...

Got Home from Flying The Pogo at Field, Was keen to see what the Specs would be for 10x10 apc prop that i had at home that i forgot to bring down. Swapped the Prop - Motor Test with - APC 10x10 P...

Finishing Touches with some web reading regarding pogo 1. I have installed a Canopy lock (people are losing there canopy in Flight) 2. Increased the Overall rates on Aileron from 100% to 150% a...

Pogo LR-1a Build Continues, Hoping For a Maiden This Saturday if i Finish it by Then. Enjoying the Build Eflite Make great KIts Design very well. Joining of Wings and cutting in and Gluing in of A...