Hi everybody. Battery elimination circuits or BEC. It is something I think all of us should have knowledge about, my understanding was a bit limiting so I went on to you tube and collected a couple of...

Parkzone Trojan T28 US Navy colours and has spectrum long-range receiver $200 :;; ;;; T28? Frame only with servos make me an offer HK- XCITE 320 has never been flown and have some p...

Hi Karen the terminals on my battery need changing, which ones do I need?, the ones on the Speed control as well as the charger do not fit the ones on the batteries so they need to be changed. So f...

Hi everybody, I was passing the field this morning so I called in to have a look and see her wet it was, both runways are still quite boggy . A small portion of the main runway was dry, the only are...

Hi guys. I’m looking for a male to male extension servo lead 15 cm lengths, I had a crash in my quad on Saturday and well as destroying the receiver it also cut through one of my leads I’ve ordered s...

Hi everybody. I’ve decided to start a post about my favourite control board open pilot the benefits of our members and also visitors. OpenPilot is a next-generation Open Source UAV autopilot created...

Hi Kieran last weekend after leaving the field. I visited ultimate hobbies, and purchased a Park Zone Radian PRO plug and play version, and I have a couple of questions about the new radian?. ...

HI, guys. I visited the field this afternoon after visiting the blind shop to pick up some parts for my vertical blinds the field is looking good has been mode by clubs mower guys and counsel as wel...

Hi guys. I had a bit of a problem putting a new receiver in my Eachine the reason why I changed over was the receiver in it was to big I’m blind it to my Taranis with no problems than I opened libre p...

Hi Rob. I had a real good look at the harness this morning what has happened around the wire harness through where gap at the top of the frame and down to where it plugs in to the CC3D board and appar...

Hi Jason. Wanted to ask you about Micro HKPilot Mega master set. what is the procedure to program your radio. I noticed when you were flying the drone on Australia.Day you had a iPad is this just f...

HI GUYS. CAME ACROSS THIS DYS CARDON FIDRE FOLDING 250/320 SIZE QUADCOPTER ON HOBBYKING WEBSITE BELOW IS SOME YOUTUBE VIDEOS AND CATALOGUE NUMBER AS WELL, NOT SURE HOW GOOD THIS IS IT HAS CC3D CON...

Hi guys. On the Quadrysteria website got a Power Distribution Lead for Quad (4 x 3.5mm to XT60?. Looking at the photographs the lead seems to be heavy-duty so my question is good enough to run a 220...

Hi, Stephen. Thanks for the post. This is a Quad that I’m thinking about buying, it has Afro ESC 20 AMP, motors sunny sky 980KV I wondering if it’s the best option percent off a couple of emails with ...

Hi Jason. What size FPV transmitter are you using noticed a little break up at times, is that the course of the trees or size of the transmitter?. I in the process of ordering my new quad the V3 bl...

Hi Jason. The question about FPV. Do you use a filter to block RF?. I think I’ll get one of those transmitters as well. Kind regards, Bob.

Hi, Simon. On Sunday I was madly ordering parts from the US Hong Kong and still I have to order some more stuff yet, V3 black member kit apparently comes with a basic Naze32 not sure if I’ll replace i...

Hi Jason. I think you might be right about the HKPilt versus Naze32, apparently the Naze32 fall version GPS hold doesn’t work very well there are problem with it operating attempting to correct the co...

Hi, Simon. Yes please if you could solder a JST plug on one of these batteries I would be appreciated and of course meet any costs my soldering skills especially with battery terminals is not real goo...

Hi, Simon. Start with thanks very much. I’ve yet to order the battery looking on the HobbyKing website Turnigy 2200 mAH 2S 20C lipo pack is the only one that will fit inside the battery monitor cas...

Hi Kieran. You better check with your bank manager first made, I’ve had a look on the coupler YouTube videos and it is a really nice unit though fairly expensive my understanding it comes with everyth...

Hi Jason and guys. What about a slalom course similar to what skiers have each pilot could take turns in flying through the slalom course with a stopwatch on them?. Regards, Bob.

Hi guys. I wanted to start a discussion about which 250 quad frame is the best??.The frame where the arms are all in one such as on QAV 250 all. Or with the ZMR250 that has arms will bolted on not sur...

Hi, Simon. Cam across a you tube video of a guy building Diatone #37 250 quad link to below video boards the end, as he was testing the motors the whole unit erupted in smoke after carrying out a exa...

Hi, Simon. I’m are beginning to come round to your way of thinking but had the guy used nylon bolts instead of metal ones in he may avoided that problem?. I did is some research on HK website but ...

Hi, Jason. I’m interested in your assessment of the CC3D control board, I’d like to put one into a cheap 250 quad at some stage in the future.

HI, John. The problem with CC3D is the software there not updating it and the revolution what is the successor to CC3D controller is not been released they will not licence a manufacturer at all CC3D ...

Hi,John.Would it be possible to give me their webpage link so I can download the software to have a look at it thanking you in advance. Bob.

HI, Simon. I thank you very much for the tip of follow-up CC3D Revolution, Mr. Painless 360 that guy is quite good I have quite a few of his videos that I’ve downloaded from you tube and they are very...

Hi everybody. Below is 3 quad that I’m interested in I would appreciate any input thanking you in advance. 1 Quanum Falcon Billet Block FPV Racing Frame Like this one very much I think it’s a kn...

Hi everybody. Have a look at this hobbywing ESC Opto type they come in 10A/20A/40A the plugs from the motor plug straight into the end of the ESC instead of having a lot of extra wire that you got a g...

Hi guys. Well to say I’m annoyed underline is probably an understatement I’ve received an email this morning from HobbyKing with a few specials amongst them was motors for my new drone they were half ...

Hi Simon. Looks like a fairly good machine for the price. To break an arm the machine must be going at a pretty good speed?, Looking at the photographs the arms look quite solid ?, According to the ba...

Hi Simon. I’m thinking about getting one as well is a sort of backup to my main quad the problem I had late last year was getting hold of some spares it took forever to get them mostly because the US ...

Hi Simon. If the lights are easy to remove I certainly will do that would save buying new batteries, if weather good are you coming down this weekend also like to see the machine actually flying if th...

Hi guys. Here is a you tube video by our friend in NZ demonstrating air gates for quads, by the look of it there very flimsy I also have a look on HK website and could not find them. Review: HobbyKin...

Hi everybody. Came across a you tube video showing how to set up Emax Nighthawk Pro 280 using DRonin GCS. It looks the same as librepilot links below number two video is the one that looks like libre...

Hi. guys, here is a you tube video from a friend across the ditch demonstrating the quantum V2 upgrade kit???. Kind regards, Bob. Upgrading the Quanum FPV Video Visor V2 https://www.youtube.c...

Hi guys. Here is a you tube video showing some of the new devices to counteract row quads. https://www.youtube.com/watch?v=X27-2WDIZR0

Hi you lucky guys. Not sure when my Eachine will arrive, I only ordered on March 18 so I guess it’ll arrive in the next six weeks or so. Now setting up CC3D board this quite a few really good you ...

Hi guys. Well a little while ago I posted that Eachine Racer 250, hadn’t arrived today I sent an email off to banggood below is a copy of the return email I know what I’d like to say but because this ...

Hi guys. Here is a you tube video of painless360 using a Windows tablet to program quads using several of the most common programs. I guess this would be good to take down to the field to make adjust...

Hi Simon. Yes I think the idea of the a cheap laptop running windows seven is the way to go a question what is SSD . Hi Steve. Very interesting. However having a look at some of the photograph and...

Hi guys. A firm a couple of refurbished laptops on eBay below was links to them of anybody’s interested prices good. Have a 30 day return policy but no warranty . http://www.ebay.com.au/itm/Dell-La...

Hi guys. This Eachine is becoming a total pain first it took forever to get here now I’m having problems with finding batteries that fit. Now try to load the software and this message appeared }GCS an...

HI, dirk. As I said to Simon I completed the Wizard up to where it sent me to the radio settings that’s where I’m now confused so not sure what to do next???. Somebody down the field on Saturday or Su...

Hi Jason and follow FPV. I’ve got a problem with the runcam camera. The little controller that you plug into the back of the camera so you can access the menu is not working at said fraud tiny little ...

Hi, guys. The quantum V2 gobbles upgrade kit with the improved lenses. Is at the moment $14.09 on the Australian warehouse so if you want one maybe it is the time to grab one.

Hi, Jason. Thanks very much what is happening is the controller that come with a camera will won’t work I can press and press the button and nothing happens but on rare occasions it will work once but...

HI, Todd. Thanks very much I could possibly try the device that came with a camera I think is called a four way toggle switch and is quite small?, Maybe that’s part of the reason it is not working pro...