Hi, guys. I want to wish everybody a merry Christmas and a very prosperous New Year.

I guys. Is anybody came across a small plastic container with sums screwdrivers I can’t find them and I’m a bit concerned in a left accidentally at the field some anybody comes across it with the plea...

Hi guys. I wanted to start a discussion about which 250 quad frame is the best??.The frame where the arms are all in one such as on QAV 250 all. Or with the ZMR250 that has arms will bolted on not sur...

Hi, Simon. Cam across a you tube video of a guy building Diatone #37 250 quad link to below video boards the end, as he was testing the motors the whole unit erupted in smoke after carrying out a exa...

Hi, Simon. I’m are beginning to come round to your way of thinking but had the guy used nylon bolts instead of metal ones in he may avoided that problem?. I did is some research on HK website but ...

HI, Andre. You should talk to Peter he’s also done a bit gliding and like you he said the best results were around at the ramp.

Hi, Rob. I’m also thinking about getting orange module for my TARANIS because I have several orange and spectrum receiver’s and it would be a total waste not to use them.

Hi, Jason. I’m interested in your assessment of the CC3D control board, I’d like to put one into a cheap 250 quad at some stage in the future.

HI, John. The problem with CC3D is the software there not updating it and the revolution what is the successor to CC3D controller is not been released they will not licence a manufacturer at all CC3D ...

Hi everybody. When I was buying the quad I bought a sky zone TS832 600W 32 channels transmitter four $87.58. From HK Webpage below. Recently I was looking on banggood website and came across TS83...

Hi,John.Would it be possible to give me their webpage link so I can download the software to have a look at it thanking you in advance. Bob.

Hi,John.Would it be possible to give me their webpage link so I can download the software to have a look at it thanking you in advance. Bob.

HI, Simon. I thank you very much for the tip of follow-up CC3D Revolution, Mr. Painless 360 that guy is quite good I have quite a few of his videos that I’ve downloaded from you tube and they are very...

Hi everybody. Below is 3 quad that I’m interested in I would appreciate any input thanking you in advance. 1 Quanum Falcon Billet Block FPV Racing Frame Like this one very much I think it’s a kn...

Hi everybody. Have a look at this hobbywing ESC Opto type they come in 10A/20A/40A the plugs from the motor plug straight into the end of the ESC instead of having a lot of extra wire that you got a g...

Hi guys. Well to say I’m annoyed underline is probably an understatement I’ve received an email this morning from HobbyKing with a few specials amongst them was motors for my new drone they were half ...

Hi Simon. Looks like a fairly good machine for the price. To break an arm the machine must be going at a pretty good speed?, Looking at the photographs the arms look quite solid ?, According to the ba...

Hi guys. Here is a you tube video on the DC3 been upgraded to use gas turbine engines really amazing this version will allow these planes to fly for many more years. https://www.youtube.com/watch?...

Hi Simon. I’m thinking about getting one as well is a sort of backup to my main quad the problem I had late last year was getting hold of some spares it took forever to get them mostly because the US ...

Hi Simon. If the lights are easy to remove I certainly will do that would save buying new batteries, if weather good are you coming down this weekend also like to see the machine actually flying if th...

Hi guys. Here are some information on flight stabilisation systems. I’ve thought about putting one of these devices in Bix 3. Because of the problems with the Bix 3 Pauling to the right and generally...

Hi guys. Here is a you tube video by our friend in NZ demonstrating air gates for quads, by the look of it there very flimsy I also have a look on HK website and could not find them. Review: HobbyKin...

Hi guys.I’ve received a deluge of emails pretending to be PayPal, so the other day I’ve forwarded one of the emails to their spam section on here is a copy of the email I received back read important ...

Hi, Jason. I’d like to give it a go even though I probably come last because I’m not very fast yet but that doesn’t worry me at all I would be very happy for the experience and I’m sure there are oth...

Hi guys. Yes we need this sorted out the sure . I myself are hovering well I hope and I now need to practice flying circuits I’ve considered coming down during the week when the runway is empty that w...

Hi everybody. Came across a you tube video showing how to set up Emax Nighthawk Pro 280 using DRonin GCS. It looks the same as librepilot links below number two video is the one that looks like libre...

HI, Kiran. If I knew for certain that you were coming down we could have left the gates up for you I left about one I’d finished my quad practice and nobody else except for Pete and myself with their,...

Hi. guys, here is a you tube video from a friend across the ditch demonstrating the quantum V2 upgrade kit???. Kind regards, Bob. Upgrading the Quanum FPV Video Visor V2 https://www.youtube.c...

Hi Jason. As you already know I’m very keen to be involved in quad racing and whatever form it can be carried out however I am not the fastest quad racer but been involved in a race is good enough for...

Hi guys here is to you tube videos of hybrid airships by Lockheed Martin, at this stage it is just on the drawing board but somebody who was always been interested in airships/blimps it is very intere...

Hi guys. Today a snake was seen near the pilot box and it got me thinking maybe it’s time to have Rossall or somebody else give us a first aid course in how to handle a snakebite as well is any other ...

Hi guys. I’m looking for a male to male extension servo lead 15 cm lengths, I had a crash in my quad on Saturday and well as destroying the receiver it also cut through one of my leads I’ve ordered s...

Hi Simon. Rob. Robert. Thanks very much appreciate any help I can get. Simon I moved the receiver to inside the frame and what happened was when I landed a little bit hard the model flipped upside dow...

HI, Robert. I’ll be down the field on Saturday or I can pick it up from your place I also live in Toongabbie as well so whatever is best.My phone number is 96363117. I really appreciate doing this for...

HI, Robert. I’ll be there between seven and 730 but you do not have to come that early I’ll be there to at least 12 o’clock. And talking of my quad have a little bit of problems this morning I was app...

Hi guys. Here is a you tube video showing some of the new devices to counteract row quads. https://www.youtube.com/watch?v=X27-2WDIZR0

Hi you lucky guys. Not sure when my Eachine will arrive, I only ordered on March 18 so I guess it’ll arrive in the next six weeks or so. Now setting up CC3D board this quite a few really good you ...

Hi guys. Well a little while ago I posted that Eachine Racer 250, hadn’t arrived today I sent an email off to banggood below is a copy of the return email I know what I’d like to say but because this ...

Hi guys. Here is a you tube video of painless360 using a Windows tablet to program quads using several of the most common programs. I guess this would be good to take down to the field to make adjust...

Hi Simon. Yes I think the idea of the a cheap laptop running windows seven is the way to go a question what is SSD . Hi Steve. Very interesting. However having a look at some of the photograph and...

Hi guys. A firm a couple of refurbished laptops on eBay below was links to them of anybody’s interested prices good. Have a 30 day return policy but no warranty . http://www.ebay.com.au/itm/Dell-La...

Hi Steve. Thanks very much from doing that or so anybody who needs FPV aerial adapter connectors I have plenty of them both male to male. As well as female to female.

Hi guys. This Eachine is becoming a total pain first it took forever to get here now I’m having problems with finding batteries that fit. Now try to load the software and this message appeared }GCS an...

HI, dirk. As I said to Simon I completed the Wizard up to where it sent me to the radio settings that’s where I’m now confused so not sure what to do next???. Somebody down the field on Saturday or Su...

Hi Jason and follow FPV. I’ve got a problem with the runcam camera. The little controller that you plug into the back of the camera so you can access the menu is not working at said fraud tiny little ...

Hi guys. I know where that shop is it’s not far from my brother-in-law and sister-in-law’s house and I’m lucky if I get to visit them two a year so I’m not just go over there and have a look, not sur...

Hi, guys. The quantum V2 gobbles upgrade kit with the improved lenses. Is at the moment $14.09 on the Australian warehouse so if you want one maybe it is the time to grab one.

Hi, Jason. Thanks very much what is happening is the controller that come with a camera will won’t work I can press and press the button and nothing happens but on rare occasions it will work once but...

HI, Todd. Thanks very much I could possibly try the device that came with a camera I think is called a four way toggle switch and is quite small?, Maybe that’s part of the reason it is not working pro...

Hi guys. Can’t remember who?, But somebody told me that there is some cheap taranis receivers that they were buying, how have you found them?. Update, it was Robbo.