gbanger Wrote: (26-07-2011, 10:36 PM) -- If its not raining on Saturday, I'm flying, .........our sister club for some seriously overdue air time.If anyone with larger aircraft would like to join me ...

OK now fixed the typo. Have you mastered your RC Tx with its computer based programming, think you are up to the next challenge? Have a look at this: http://360vr.com/2011/06/22-discovery-flight-d...

Don't worry, there's plenty of high winds to blow all the water away. There is always Indoor flying on the 13th August, no water or wind there.[hr] How about a bulk order for this: http://www.ho...

Chris, was thinking of going Saturday morning depending on the wind. Willy is forecasting 30km which I believe is great for the standard slope soarer plane with good penetration. I think the glider ...

I was thinking of Mt ANNAN, I went out there last Friday, apparently it's a good winter site and works well with west winds. They don't mind powered since they let me fly my Kinetic. There are three f...

Yes, its looking promising, where did you have in mind, McCoy or Penrith. The postman just delivered my replacement Kinetic so will need to build that tonight.

Looking good for slope soaring, anyone interested?

The following equipement was stolen from a PEMAC member, if anyone tries to sell you any of these items please contact PEMAC or leave a message on the Contact page of this web site: 1. 1x JR PCM9XI...

Hi Rob, let me add my thanks for you efforts. My interest is not so much for building as this requires tools and bits and things and transporting those can be a pain. However I do go to Indoor meets w...

yarrumevets Wrote: (04-06-2011, 01:33 PM) -- No worries Mick - if it looks like it will work out, I'll be back here. -- I've spoken to the PEMACS President and he will be available to let us in Sun...

Drew Wrote: (24-05-2011, 12:45 AM) -- Here's some photos. The video is a little like watching paint dry. I'll edit bits out ......... with feed speeds and lost a few steps. -- Hey, watching paint...

Nice little write up on spins here: http://en.wikipedia.org/wiki/Spin_(flight) An advantage of foam is the low cost and quick repair. If we do build a club plane it would be a good idea to have sp...

kizza42 Wrote: (14-05-2011, 01:23 AM) -- The suggestion was either produce an aircraft to do the required maneuver or wait until changes are made to the wings structure (Of which there is no guarante...

It looks really great Jason, congratulations are in order. I look forward to see it flying in person.

northerner Wrote: (13-05-2011, 09:02 AM) -- OK I hope to be down this weekend........ Do I need to do anything/speak to anyone in particular before flying? (I'm not a member yet). Cheers! Graha...

A special thanks to John Pellicano for the great photos in the report. More of John's Aus Day photos can be seen on the club website in the photo Aus Day report.

I need an outrunner motor for my Funcub build. Max thrust required would be 1100gms off a 3s battery. All the Hobbyking motors are on back order. Can anyone suggest an alternative manufacturer/dis...

For those who want to check on the Council's status of fields there is a phone line 9294 8586 with a recorded message that is updated at 3pm each day. Current status has the field open. KevB

Drew Wrote: (02-05-2011, 10:05 PM) -- Build!!! Here's my newly finished XS Smart Dart .. It weighs 22g without a battery ... If the weather stays crappy, it might even get some undercarriage (or...

samste Wrote: (17-01-2011, 11:45 PM) -- Looks Like a Great Beginner Trainer Plane, and at a great price it may be a good buy when and if it goes to aussie warehouse. -- before u buy check out the f...

Has anyone told HK that Parramatta is the geographics/population center of the Sydney area. Now that I think about it the Auburn area is an even better area, just down next to the new Costco co-op cen...

Willy says the weather will be good for flying this Wednesday morning so will have the gates open for a 8.30am start. See you there. KevB

Best comment of the day from Drew after his plane had landed on the wires: 'Glad I fitted that HK Audio Locator to my plane, had no problem finding it this time' Well done Drew! KevinB

Drew Wrote: (05-03-2011, 10:26 AM) -- I reckon you should hold on to them and wehen the field is a lake, you will be the only one who can fly! If you're really looking to get rid of them, I'll try...

kizza42 Wrote: (09-03-2011, 03:46 PM) -- Yes I will! Can I please borrow both off you, it will be muchly appreciated! -- Of course, I will bring them on Saturday. KevB

kizza42 Wrote: (09-03-2011, 12:27 PM) -- Hey, Just wondering if anyone could lend me an inverter (300w or more) or a large 12v battery for next Sunday 20th March -- I have a 300w inverter and a bi...

If the weather is good I'm planning on flying between 8am and 10am this Wednesday. KevB

yarrumevets Wrote: (08-03-2011, 02:01 AM) -- Anyone interested in this? -- I was thinking of heading over there to see how things operated ... just for interest's sake. -- I was thinking of going...

I just got a Wilga plane from Hobbyking and it came with a set of floats which I do not want since I'm using wheels. If someone can use the floats it will save some landfill (for now). Have a look ...

yarrumevets Wrote: (28-02-2011, 12:04 PM) -- We went down to the "Wings over Illawarra" air-show (which wasn't much chop this time around) Jeez ... a weather station somewhere near the field woul...

Congratulations to the Engineer and Pilot on a great maiden and I have the photos to prove. (I rather liked the one of the plane in the air - minus one wheel). The other great photo is after the fligh...

The prop assembly on my Prkzone P51 has come of the motor shaft. Can't seem to work out how to remove the prop from the collet. Does anyone know how to get the prop off the collet? thanks, Kev B

brotherblonde Wrote: (15-02-2011, 04:53 PM) -- I have a 10am appointment in Parramatta & was thinking of swinging by the field on my way home....around 11 ish if you are still there. Weather permitti...

I was wondering if anyboby been to the field in the last 24hrs and could give a state of field report. If the rain holds off I would like to get some flying in this Wednesday morning. Thanks Kevin...

Looking good Steve, I am very interested in seeing how it handles with that wing, I think you said it was a ClarkeY. When do u reckon you will have the first flight? KevB

Best Wishers to each Club Member and your family. May the New Year bring good weather and great flying. Kevin B

brotherblonde Wrote: (12-11-2010, 09:44 PM) -- My Father passed away today (Friday). ....his funeral on Wednesday, back Thursday. Hopefully I'll be at the field next Saturday. -- I'm sorry for your...

Just noticed HK Aus warehouse has some 2200 3S lipos and I need a couple. Is anyone doing a local order or interested in adding to a local order to use up that 7kg postage allowance If I end up doing ...

It was a great show, my favorite was the FA18 going at 500kt, 250 feet directly above (really directly over head) the crowd (and me), and the noise you felt in your chest. This time the RAAF got up...

Anybody have experience glue the magnets in an outrunner motor? I just noticed a couple othe magnets in the motor of my Clound Fly were starting to work their way out the case. Kevin B

kizza42 Wrote: (02-08-2010, 11:21 PM) -- Anyone keen on a Avalon road trip next year ;) -- I will be there. In the past went by air as a day trip but this time would like to visit Point Cook museum...

Indoor Flying this Thursday evening 5th August. Do you have a Parkzone miniture P51 or Cub and need still air to fly it? For the past several years there has been an indoor flying meet in the baske...

Indoor Flying this Thursday evenning 5th August. Do you have a Parkzone miniture P51 or Cub and need still air to fly it? For the past several years there has been an indoor flying meet in the basket...

~KevJ~ Wrote: (16-06-2010, 01:16 PM) -- i wonder if you could bring your birds down on saturday for a "cruise" with kieran, steve and myself .. -- I asked but they declined, it seems they have safety...

Formation Flying. I was flying circuits with my white winged biplane down at the football field next to Duck River this morning when I was joined in the circuit by a flock of about 16 Cockatoos. Afte...

Anyone interested in some early morning flying this Wednesday or Thursday? I've just finished the repairs to my Cessna and need an experienced pilot to flight test and trim it?

samste Wrote: (09-06-2010, 04:41 PM) -- kevin sounds like you got that backyard flyer set up well, so how long does the lipo last on a single flight. steve :) -- I set the timer for 7 minutes an...

Went flying this morning. The beauty of a Backyard Flyer is u can do it on the local football field (a 2 minute drive away). Got over 30 minutes air time in before the wind started to pick up. :smilie...

Home made flight simulator - Here in Sydney. http://www.popsci.com.au/2009/03/aussie ... simulator (http://www.popsci.com.au/2009/03/aussie-record-worlds-most-expensive-home-brew-flight-simulator/)

Ultimate Model plane - Oz Built. Have a look at this site, http://www.tomw.net.au/travel/ara/index.html (http://www.tomw.net.au/travel/ara/index.html) And they are built in Australia. Kevin B