You're in semi luck, I'm thinking of ordering a plane!

Reserved for future use.

Reserved for future use.

Ok, getting forgetful in my old age so I'd thought I'd start a log of my past planes and a worklog for the future! Parkzone F27C Stryker Year: 2006 - Present I've had 4 Stryker airframes over the ye...

Thread hijack indeed! 3 Week ban :P

Nice but does it fly? Kieran who always wished his plastic models where airworthy.... ;)

Weather forecast for the weekend looks dull! Can't make it Saturday, hoping to get down there Sunday, Was glad to finally properly fly the Funjet on Aussie day, need some real space to really open her...

Corona Digital Metal Gears: http://www.hobbyking.com/hobbyking/stor ... oduct=6314 (http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=6314) We'll have to do some tests but we may be a...

2200kv inrunner, 6x4 prop, 30amp ESC then whatever 3S battery balances it out! Power system of champions! Have to say the finished product looks awesome, can't wait to see it fly!

You've already seen the popup, The way they want things done is very wrong, You may not be informed fully on the issues that are about to destroy some of our freedoms in Australia. See here: http://w...

Hopefully will be there on Sat & Sun this weekend, gotta make sure my Trojan is airworthy for Tuesday! Something to laugh at: http://www.youtube.com/watch?v=95jht_g3AXc#t=6m40s (http://www.youtube.co...

Busy fixing T28 for Australia Day!

Perfect!

Gotta have a plane wreck down the bottom!

Everything armed an ran post crash, I reckon it was a nasty thermal cut out/brown out that caused the rx to reboot. It takes just a bit longer than kev had to resync. Possibly a slight bit higher migh...

Wow looks good, different design to HK, looks like it takes a bigger battery?

http://www.desertrc.com/gain_control.html (http://www.desertrc.com/gain_control.html)

Looks like a resonant frequency from the vibrations, prop wash & wind? Have you tried putting some tape over the microphone? Its not you, Its a combination of plane and camera but not really either a...

Have to say I'm sorry I haven't been down, have been working every day since the Sunday before Christmas, I had half a chance to come down today, batteries were charged but I slept right through my al...

Nope, perfect place for this question. You're looking at about $130 landed depending on the exchange rate. A quick way to judge costs is "Weight x 0.02" or 3300 x 0.02 = $66AU Our shipping averages ou...

Basically means we'll move to a wednesday cycle, break something on saturday/sunday, order on wednesday, fly something else next saturday/sunday, get goodies!

Ok, an item for discussion: I'm noticing a trend with the exchange rate always being poor on a Sunday Night/Monday morning when I'm placing the group orders. Traditionally we do the orders on Sunday ...

Well she flew beautifully after we tied some house bricks to the nose! Congrats on an extremely successful build and maiden!

Down at the field now. Despite the rain it is nice and solid and will dry well today. If you don't make it down today, it should be good for flying tomorrow if there is no more continuous rain. Will b...

Remember... You saw it here first 8-)

I think the name say's it all, its a Mystery if they'll last the flight. Do some searches on Mystery ESC's, some are really good, some are craptacular (BEC Will fail as well as motor timing). I think ...

Oh man, you just missed him! Try sneaking up from behind next time! :mrgreen: Blayney is one hell of a call out!

I'm not likely to make it down this weekend, I have Carols on Saturday & Sunday, In fact Saturday evening's Carols are one of the largest in town and if you only take to family to one a year, come to ...

[youtube]http://www.youtube.com/watch?v=M6D6Q7IMXYU[/youtube] ;)

Unfortunatley I had to run so I didn't get any pics but it was a nice space, only 1 basketball court but quite high, a few obstacles to do loops around ;) Will probably get a p51 micro to tool around ...

I shall be at indoor flying tomorrow Blade MCX will hopefully be airworthy by then. Its only 15mins from work so I'll come and fly then go to work!

Worth noting that you can currently get: Very tempting as you can't get the plane alone for much less than 150 here.

I use X-plane for my aeronautical musings, Its come in handy for obvious reasons: And not so obvious ;) Maximum kudos to the first member to turn his aircon into this:

Down at the field now, nice and calm. Bring Aerogard though, flies are going bonkers!

Unlikely to make it this weekend, but not far off :) Its starting to worry me, It weighs a ton! As close to McLaren colours as I can get Carbon Fibre Yeah! :mrgreen:

Hmm, still interested, you can never have too many batteries ;) My thoughts of 3s stems from this: http://www.hobbyking.com/hobbyking/stor ... d=78&err=1 (http://www.hobbyking.com/hobbyking/store/twi...

That looks awesome! Have any profilers you'd like to sell!? I'm after a big one to use all my 3s 2200's.

If anyone needs a motor mount, I have a spare. Just ordered 3 from Modelflight

Servo Wrote: -- INDOOR FLYING: I have booked the indoor basketball court at work (UTS) for use to fly indoor models for next Wednesday (a week from today) from 6pm tll 9pm. The court has been paid f...

Lol nice, I think you forgot to flare with that landing! Nice overshoot on the taxiing!

I think you'll really hurt the Tiger CoG doing that, The Stryker is more forgiving and the skyfun is probably more forgiving again and has more of the room you need.

Yeah, you could have a mix that would do that but I dunno about your radio. Also look at a relay on the low voltage servo side of the speed controllers maybe?

Might as well just run 2 speedies as you'd proabably run into timing issues with 2 different motors. Your radio should have the mixing possible to handle it on a switch

Yep, will contact them tomorrow morning

Yeah, I think I'm gonna have to throw a little foot stamping tanty soon :evil:

Guy's please remember to post orders as per the instructions, its not hard and it saves me a hell of a lot of time. Links should include http://www.hobbyking.com (http://www.hobbyking.com) not http://...

There is probably mylar in the hinges but tape them up as a precaution. Also tape the leading edges!

Unfortunatley the Siren video didn't save. Here is a vid I captured a few weeks ago though, Check out the servo working away on the left hand side of frame and the amount of wing flex! Also, I totally...

Darren has one I believe, might be worth asking him nicely ;)

Have you spoken to Hobby King about it? As long as its ok with them, I will order. Please email me your mobile number.