Just tested the 15 x 10 APC on 6S 1140 Watts at 48 Amps, I think that will be sweet. Here is a link to some valuable info on your electric modification http://www.jperkinsdistribution.co.uk/downloa...

That looks like the ticket George. I spent last night doing a heap of static tests with various motors I have from previous aircraft that need new homes in a vice on my work bench. I used a 14 x 10 ...

I have already finished hinging all the control surfaces and the biggest modification necessary and thats the complete redisigning of the back of the front retract bay to install a battery carrier. N...

This particular Hacker is the motor I was running in my Seb Art Katana 50. I was spinning a 16 x 8 in that through the same 80 amp Dualsky ESC powered by a Flightpower 6S 5000mah 30C battery and the ...

There's nothing secret about them, they are probably on par with the high end Scorpions, they are just very powerful and are close to indestructable.... oh yeh... almost forgot... they are made in Ger...

There sure is Steve, but good luck with the shootin down shit champ. To shoot someone down you actually have to be able to keep up with them, don't fancy your chances, and now you have given me the h...

Ditto dude, hope you got some cool pressies.

Hope you both had a great day!!!! Yes! you too Rob you strange man !!! Looking forward to catching up down at the field some century soon, do you remember how to fly???????

Have a great birthday mate. Hope you get some cool presies. (Aircraft ...of course)

Steve....... What the??????

Happy birthday Kev Whats the story with the big Hawk mate.... any progress?

Yep... thats absolutley correct old man, and I got there first. Happy birthday anyway you old fart. Shame about the momory. (Every now and then it gives me great satisfaction to beat at something.) ...

Keep up the cheek young man and you will find one in close proximity to your rectum Ha... ha

Thanks to everyone for the kind wishes, you thoughts and kind words are appreciated. Except you Steve we will be sorting you out on the 24th of June old man. Be afraid! Be very afraid! Cheers all G...

Happy Birthday Kieran. Hope you had a great day and got got lots of good pressies.

I have experimented with just about every possible aileron attitude change you could make to a PZ T28, just because I could because it's such a stable predictablel platform. I agree with all of the a...

My beastie is now running a new Turnigy G25 570kv motor on a custom made carbon fibre engine mount with a 10 x 7 prop, running a 60 amp Plush ESC. I'm running it on 4S with a 3300 Nano pack, everythi...

Yeh right....... as you said KV Bahahahahahahahahaha

Thanks for doing the math Steve, I figured that, and plan on running the 10 x 8, it will be working well within itself so it will churn out a shit load of torque without any effort. "Meesalikadis"

Post Mortum on the HK G15 950Kv motor: Striped the motor this afternoon to see if I could find the cause for the failure. Although the motor was only drawing 42 amps at full throttle and I spent alm...

Yeh Steve, the PZ Trojan is a lot like my stomach, it always seems to cope with abuse, it doesn't matter what type of beer or how much I stuff into it, it always seems to say " is that the best you go...

Performance Update: For those of you that saw it, you know what sort of performance I was getting out of the HK G15 in my Trojan...... well..... that all came to a smokey end this afternoon when the ...

Hi Guys Just stumbled accross this on E Bay while looking at E flite stuff. If anyone is thinking about retrofitting their T28 with an Eflite Power 15 this motor mount is definatley the goods. http...

Hey Steve Cant help you with throw rates. Probably because I use a DX6i. But my expo rates are Aileron 40 % Elevator 40 % Rudder 60 % I personally prefer to make that dead spot at centre stick a...

Another thing you can do stop over control which causes elevon failure on the Skyfuns is to set your elevons up with dual rates. I take off and land with my servos set at 100% but once airborn and ap...

You are probably on the money with the bearing change Jason. After my PC9 dissaster I striped and checked the motor and bearings and they seemed and felt OK. But during the first flight it developed...

Hi Wobbly I used 15 minute Hobby King Med cure epoxy to build my Skyfun and it is as strong as a battleship. The CA glues are OK but dont have any real tortional strength. So even if it did glue to...

Finally finished the beastie.... Sweeeeeeett!

Steve Can you tell me what timing you are running on your Scorpion 2221-8 motor? Thanks

Almost done. Paint job finally finished

HEY STEVE THAT'S WHAT I AM TALKIN ABOUT !!!!!! LOOKS LIKE SOME SERIOUS BOOTY YOU GOT BOLTED IN THERE. Hope im there Sunday to see the fireworks..... Should be "fully sick bro". Your paint job look...

Hello all Who and what is OMP. By the way Steve, did you know that you need a licence for space flight, that motor looks big enough to launch the space shuttle... if you bolted that sucker onto Paul...

Hey Kieran Cant find wing set up or anything to do with Delta in my radio. I have Mix 1 / Mix 2 or Wingtailmix setup????with elevon dualaileron or whoops forget about it my scroll wheel just died .....

Hey Kev Youve got a DX6i What do you plug your servos into on the receiver? Do I need a Y harness or is it programmed in the radio? And how do you set up the elevon mix? I havent put my radio gear...

Hello fellow Skyfun pilots Just picking all your brains again (Kiran,Kev,Steve) can anyone give me a good C of G measurement from the tip of the nose for the Skyfun. The manual says it should be slig...

Hey Steve Good to see your Funjet upgrade progressing. I have modified my wings to run the servos on the top of the wings as well and will be running HK digital metal servos. It makes sense... don"t...

Hey Steve That engine mount looks awsome. I would take it easy on applying too many coats of urathane. It is not very strong at all until mixed with fibreglass. Just as polyester resin is brittle a...

Now that sounds like a plan Steve My construction is progressing nicely. Striped all the decals, sanded the airframe and just this afternoon finnished epoxying the whole thing together. Ive retapped...

OK plane construction has commenced. Carbon fibre and fulalage glassing will commence this week I have recieved my Scorpion 2221-8 motor (same as Steves) and have ordered an 85 amp ESC that is 40 gr...

Steve I will be flying tomorrow but have to work in the morning and wont get down to the field before 12 at the earliest Will see you then to discuss engine mounts if you are still there.

My Skyfun is fitted with the standard mount thanks Steve, I was going to upgrade prior to construction to avoid the posibility of failue as I have read a few of you guys have had issues with the stan...

Howdy all Yo Sky Fun Jet compatriots Steve suggested upgrading or replacing the standard motor mount as he has had 1 or 2 fail Does anyone have a part number or website that has a suitable replacm...

Hey Steve Thanks heaps for all the information. Your a champion, I really do appreciate all your help The plan it to build a thermonuclear bullet, but Im only a rookie so we will have to wait and s...

Hello aviators It is all your fault... Yes thats right .....Steve, Kev and Kieran I have been watching you,.... screaming around the sky at Mach 2 It looks like way to much fun So now I want to pl...

That would be a great plane for training people to go from beginner to sports. I think it would be even better if you ran it on 4S, but you would want to put a decent spar in the wing if you were goin...

Thanks for the link Claudio......... hmmmmmmm ...... I think I have found something that I ......... never mind!

Hey guys and Dave in particular, you know you were interested in a Deuces Wild, well this one is a bargain. Only problem is its in WA http://www.rctrader.com/category/340/Electric/listings/2027/E-FL...

Thanks Paul Didn't think of that option, but it is a good one. I will look into it. Cheers Gazz

Hi Jason or anyone else that can help. The canopy off my Seb Art Sukhoi decieded to part company with the aircraft last weekend, after spending over 2 hours in the bull rushes, it could not be found....

Thanks all I looked at and almost bought a Go Pro II while on holidays in Coffs recently. I have told the financial controller that is what I want Santa to get me. That is of course if the fat bast...