Merry Christmas & Happy New Year - Printable Version

+- Parramatta Radio Control Aircraft Club (https://forum.rcflyingclub.com)
+-- Forum: Forums (https://forum.rcflyingclub.com/forumdisplay.php?fid=7)
+--- Forum: General (https://forum.rcflyingclub.com/forumdisplay.php?fid=3)
+--- Thread: Merry Christmas & Happy New Year (/showthread.php?tid=243)

---

Merry Christmas & Happy New Year - popeyepete - 24-12-2010

Wishing all a happy, safe and prosperous Christmas and a fantastic New Year.

---

RE: Merry Christmas & Happy New Year - brotherblonde - 24-12-2010

Merry Christmas, happy new year to all.

---

RE: Merry Christmas & Happy New Year - samste - 24-12-2010

(24-12-2010, 05:19 PM)popeyepete Wrote:  Wishing all a happy, safe and prosperous Christmas and a fantastic New Year.

Yes to all the above and hope Santa is good to you all and your family, and if you like me wont be able to move Tomorrow after all the food Ive eaten at the big Family Gathering..

But Seriously all the Best to you Guys and your Families and Enjoy.

Hoping to See Lots of Members Flying over the Holidays. ,
Me being one of them as going through Withdrawls not Flying for so long.

Steve

---

RE: Merry Christmas & Happy New Year - helijeli - 24-12-2010

All the Best for Christmas and the new year. Here's to many pressies (eg Planes) from Santa.

---

RE: Merry Christmas & Happy New Year - paulj - 25-12-2010

All the best to everyone.
My pressie (Jet teng L39) in transit should be here
by next week.

---

RE: Merry Christmas & Happy New Year - Servo - 25-12-2010

Best Wishers to each Club Member and your family. May the New Year bring good weather and great flying.

Kevin B

---

RE: Merry Christmas & Happy New Year - gbanger - 25-12-2010

Hope you all have a great christi and an even better new year.
Cheers
Gazz

---

RE: Merry Christmas & Happy New Year - ~KevJ~ - 26-12-2010

a late merry xmas from me too to everyone, and a pic of my xmas present and one of dads too while im at it.. its my new pride and joy
My Hawk,
   
   
and Dads L39,
   
   
both jets are full composite glass epoxy and are waiting for 90mm fan units.
hope you guys all got good scores too see you all soon be safe over new year and look forward to flying again soon with ya

---

RE: Merry Christmas & Happy New Year - samste - 26-12-2010

Very Nice, Very Nice.

Whats the size, and looks like no rudder Kev for knife edges

Heh 6s looks It might Fit nicely. 1400kv edf, 200kmh easy.

Steve

---

RE: Merry Christmas & Happy New Year - ~KevJ~ - 26-12-2010

(26-12-2010, 09:06 AM)samste Wrote:  Very Nice, Very Nice.

Whats the size, and looks like no rudder Kev for knife edges

Heh 6s looks It might Fit nicely. 1400kv edf, 200kmh easy.

Steve

heh.. 6s... think bigger!

8s is the standard, im toying with a 10s configuration at this stage, depends on the fan i pick tho, looking at the 11 bladed stumax fan which may want too many amps so the twin 5s batts would need to stay at 5000mah which would be too much , if i can get reasonable flight times out of 4000's it will be 10s though.. looking at say 1100 ish kv on 10s else stay the 1400 kv mark but 8s..

the L39 was the second kit by jet teng so dads kit has rudder pre cut, mine needs to be manually cut.. but yes there will be knife edges

mine is:
length: 1320mm
ws: 1110mm

dads is:
length: 1380mm
ws: 1075mm

they are 1/9th scale. full retracts with oleo struts the lot, and expensive as hell so im kinda half in trouble for spending so much.. but hey forgettabouttit.... its xmas!

edit: for the record, im wanting 260+ kph , guy on youtube posted a 284kph on an 8s setup..

---