09-09-2013, 08:22 PM
After My MisHap Take Off on My Fourth Flight, I Slightly Crack the Fuselage.
So i Did a Epoxy Fiberglass Mat Fix on The inner for double Strength and gave it a Bright Color Make Over.
AS the Original Colors where very Hard to See in the Air.
Went The Green Craze White Look for Fuselage, It's Different
2200kv prop drive, with 80amp esc 7x6 prop 2200ma 3s nano, sweet and fast. (on 4s 1300ma super fast but motor gets verrry hot short bursts only )
2200kv prop drive with 80 amp esc 6x5 prop 1300ma 4s nano, sweet and very fast.
Steve
So i Did a Epoxy Fiberglass Mat Fix on The inner for double Strength and gave it a Bright Color Make Over.
AS the Original Colors where very Hard to See in the Air.
Went The Green Craze White Look for Fuselage, It's Different
2200kv prop drive, with 80amp esc 7x6 prop 2200ma 3s nano, sweet and fast. (on 4s 1300ma super fast but motor gets verrry hot short bursts only )
2200kv prop drive with 80 amp esc 6x5 prop 1300ma 4s nano, sweet and very fast.
Steve
What Do You Mean Theres a Throttle Curve ?, Its Either all the way up or all the way down