23-05-2013, 08:23 AM
(22-05-2013, 10:42 PM)BenR Wrote: I am in the process of replacing a wing on a UM T28, and as part of that, I need to glue a servo onto a piece of foam, where the servo has no plastic housing. What sort of glue should I use? Will CA or epoxy damage the servo?
UM planes are made from styro and will melt away if CA is used.
Hot glue could be risky on thin surfaces and the heat could melt it.
Your safe if you use the foam glue/white tubes you get with most ARFs.
http://hobbyking.com.au/hobbyking/store/...l_20g.html
George
"Crash and Cry! Don't fly"
RadioX9 & DX8
HK Cri Cri ugly,Super Cub 1870mm balsa, Sbach 1000mm balsa, Vampire, Katana E50 balsa, BA Hawke 90mm (on hold for large runway), Durafly BF110, Corsair,
EScale Zero
Freewing Eurofighter Typhoon & SU-34
Starmax F5e Tiger & 70mm F-18
FMS T-28 Trojan, P-38 Silver, 50mm F-86, C-17 Globmaster
Fly fly F-100
B-25 2.0m LX and A10 1.5m Langxiang (being glassed and re-built)
Seagull Super Tucano