22-03-2013, 03:32 PM
DX8 TELEMETRY ?
Has anybody used this feature with the DX8 8000R RECEIVER AND TELEMETRY MODULE ?
in the box comes a telemetry kit module which plugs into the 8 channel receiver via the binding port , then you have an included piece of looped wire ( temp sensor) and a plug with 2 long wires stripped bare at the ends ( voltage sensor) these can be run on seperate feed or simultainiosly using a supplied Y harness lead . then there is the option of buying a rpm detector if you wish .
to cut a long story short , i dont know how to set these up or if they are accurately reliable . i'll start with the temp sensor - WHAT TEMP RANGE ARE WE TALKING HERE ?
and the voltage lead - whats its v range and use - ie 12s battery pack 50v ? or just bec voltage pack?
any info appreciated ? i think 12s 50v at 100amps would turn this module into a fire .
the instruction manual gives no info on how to set these up .
Has anybody used this feature with the DX8 8000R RECEIVER AND TELEMETRY MODULE ?
in the box comes a telemetry kit module which plugs into the 8 channel receiver via the binding port , then you have an included piece of looped wire ( temp sensor) and a plug with 2 long wires stripped bare at the ends ( voltage sensor) these can be run on seperate feed or simultainiosly using a supplied Y harness lead . then there is the option of buying a rpm detector if you wish .
to cut a long story short , i dont know how to set these up or if they are accurately reliable . i'll start with the temp sensor - WHAT TEMP RANGE ARE WE TALKING HERE ?
and the voltage lead - whats its v range and use - ie 12s battery pack 50v ? or just bec voltage pack?
any info appreciated ? i think 12s 50v at 100amps would turn this module into a fire .
the instruction manual gives no info on how to set these up .
patience !! paaatience !! paaaaaatience paaaaaaatieeence dooooohhhh !!!
DANGER WIFE CAN READ FORUMS . love you darling . sig changed .