27-12-2012, 12:30 PM
(27-12-2012, 10:05 AM)Flying fisho Wrote: Just bought a new Zlin (Model flight boxing day special) http://www.modelflight.com.au/products/H...07-10.html
According to Ecalc am looking at a power train - Turnigy G60 400kv, Turnigy 60amp Plush ESC & a 14 x 8 prop. Is this an overkill ? Not sure which servo's tho
hi wayne . i use in my mx2 a turnigy 50 50 580 kv 2000 watt motor on 6s 3000mah 20 c batteries it drives a 15x8 lightwood prop and has about 5+ kg of thrust . http://www.hobbyking.com/hobbyking/store...duct=22035 THE MX2 WIEGHS 2.2KG AND HAS 57 INCH WINGSPAN . same size plane as your ZLIN.
i would suggest an 85 amp esc or more for this type of plane as it will be pulling some load if your hovering and verticle climbing etc you would be pulling about 95 amps spike and 2100 watts on 6s .
or put the 15x6 on , just as good and about 85 amps spike and 1900 watts . great motor with heaps of grunt .
patience !! paaatience !! paaaaaatience paaaaaaatieeence dooooohhhh !!!
DANGER WIFE CAN READ FORUMS . love you darling . sig changed .