08-07-2012, 06:28 PM
(08-07-2012, 11:46 AM)Claudius Wrote: With The Extra 300s what is the Cog Measurement on Yours.
I have set my Up Light as you Suggested 3s 1000ma.
Just checked. Looks to be about 120mm back from the wing-root with a 3S/1000mAh (more or less right on the second wing spar), and 110mm back with the 3S/1300mAh.
[/quote]
Thxs Claudio, I actually gave it a maiden Today and position the lipo all the way forward as possible and pot lucked it, Took off from Hand and Had 5 flights Today using 3s 1000ma.
I found my Lipo sits basically right at the Front and still has a slight tail heavy feel but it flys cool.
Using 10x4.7 prop max amps on full throttle 18 amps.
The motor is a 1100kv, i bought ages ago for a project that never happened and is very Light and the Esc is Mega Light 25 Amp.
I think i may need to relocate Esc to underside to Tidy Up away from lipo, But i had to get it in the Air to see how it Flies.
Its alot of Fun, i can see why you enjoy it, and your Right Keeping it Light is the Key, as i tried a heavier Lipo and made a huge Difference to its Flying.
It Flies so nice Being Light.
Not Sure how you set yours Up but I'm Thinking Possibly move Rx & Esc to the Underside near Front to Give it a Little more Weight to The Front and then i may be able to bring the lipo back a bit so the front Closes up.
P.s I Actually Plastic Hinge all my Control Surfaces, Super Strong
Steve
What Do You Mean Theres a Throttle Curve ?, Its Either all the way up or all the way down