29-05-2012, 11:11 PM
I think the G25 will do OK on 3S you can just prop it up slightly to get the same power from it
you might try a 15X6 prop and find it's great.
By the way just looking at that machine it looks like a very nice plane!!
This ESC will do the job
http://www.hobbyking.com/hobbyking/store...A_ESC.html
but you will need a seperate Bec like this one, you'll want one that can deliver 5Amps
http://www.hobbyking.com/hobbyking/store..._UBEC.html
Servo's like these would be OK
http://www.hobbyking.com/hobbyking/store...14sec.html
But if you want the best servos for the job then it's hard to go past these but it'll cost
http://www.ebay.com.au/itm/Hitec-HS-5085...ccessories&hash=item45fd6b7916
you might try a 15X6 prop and find it's great.
By the way just looking at that machine it looks like a very nice plane!!
This ESC will do the job
http://www.hobbyking.com/hobbyking/store...A_ESC.html
but you will need a seperate Bec like this one, you'll want one that can deliver 5Amps
http://www.hobbyking.com/hobbyking/store..._UBEC.html
Servo's like these would be OK
http://www.hobbyking.com/hobbyking/store...14sec.html
But if you want the best servos for the job then it's hard to go past these but it'll cost
http://www.ebay.com.au/itm/Hitec-HS-5085...ccessories&hash=item45fd6b7916
“The knack of flying is learning how to throw your machine at the ground and miss.”
"When once you have tasted flight, you will forever walk the earth with your thoughts turned skyward, for there you have been, and there you will always long to return." ~Leonardo Da Vinci