03-05-2012, 07:52 PM
I'd get in contact with omp and ask for the manual back as well
Like Steve and Gazz says make sure you have turned on your TX just before you
Fire up the RX
My receivers flash too if I turn on the RX a long time after turning on the TX
Also flashes if change packs without turning of the TX in between
If it still flashes then re bind. If still try another RX
It might be that RX
Also if it's a satellite make sure that you have the satellite plugged in before you bind them
Like Steve and Gazz says make sure you have turned on your TX just before you
Fire up the RX
My receivers flash too if I turn on the RX a long time after turning on the TX
Also flashes if change packs without turning of the TX in between
If it still flashes then re bind. If still try another RX
It might be that RX
Also if it's a satellite make sure that you have the satellite plugged in before you bind them
“The knack of flying is learning how to throw your machine at the ground and miss.”
"When once you have tasted flight, you will forever walk the earth with your thoughts turned skyward, for there you have been, and there you will always long to return." ~Leonardo Da Vinci