01-04-2012, 07:51 PM
Is there any Reason Why you cannot Use a No bec Esc for your motor Control and then a 2nd Esc with Bec for power to Rx and Servos
Eg 120amp esc no bec powering Motor
18amp esc with 4 amp bec for rx power
Did have a discussion with Jason Re separate Bec and dual bec Setups etc which made me think instead a bec use an Esc
Steve
Eg 120amp esc no bec powering Motor
18amp esc with 4 amp bec for rx power
Did have a discussion with Jason Re separate Bec and dual bec Setups etc which made me think instead a bec use an Esc
Steve
What Do You Mean Theres a Throttle Curve ?, Its Either all the way up or all the way down